LISA finite element in wine

wasuthm1 · Post by **wasuthm1** » Sun May 01, 2011 6:11 am

I want to use LISA finite element program (http://www.lisa-fet.com/) under my Ubuntu machine.
I did install Wine and it runs ok, then I install LISA and it installed without any error.
However whrn I run LISA, it did not appear on the screen without any error?

Anyone can assist how to me LISA running?

vitamin · Post by **vitamin** » Sun May 01, 2011 11:19 am

Wine version? Terminal output?

wasuthm1 · Post by **wasuthm1** » Sun May 01, 2011 6:04 pm

Thank you for the response, There are some information here:
===========
wine --version
wine-1.2.2

running LISA from terminal
wine: Install the Windows version of Mono to run .NET executables
===========

Does it mean I miss "Mono" program?
how can I get this program from?

jjmckenzie · Post by **jjmckenzie** » Sun May 01, 2011 6:13 pm

On 5/1/11 4:04 PM, wasuthm1 wrote:

Thank you for the response, There are some information here:
===========
wine --version
wine-1.2.2

running LISA from terminal
wine: Install the Windows version of Mono to run .NET executables
===========

Does it mean I miss "Mono" program?
how can I get this program from?

What version of .NET does LISA require?

If it is .NET 1.1 or 2.0 you can try installing the native version.

If it is .NET 3.0, 3.5 or 4.0 try Mono.

http://wiki.winehq.org/winetricks describes what winetricks is and how
to use it.

James McKenzie

wasuthm1 · Post by **wasuthm1** » Sun May 01, 2011 6:41 pm

jjmckenzie wrote:On 5/1/11 4:04 PM, wasuthm1 wrote:
What version of .NET does LISA require?

If it is .NET 1.1 or 2.0 you can try installing the native version.

If it is .NET 3.0, 3.5 or 4.0 try Mono.

http://wiki.winehq.org/winetricks describes what winetricks is and how
to use it.

James McKenzie

===
Microsoft .Net 2.0 and XNA 3.1. The installer will prompt to download them if they are not present.
===
When I installed It, it prompted to install XNA 3.1.
After installing XNA 3.1 as suggested, then the installation was successful.
But when I run, I got mono message.

I will try to install .net 2.0 first then mono

Thanks

jjmckenzie · Post by **jjmckenzie** » Sun May 01, 2011 6:51 pm

On 5/1/11 4:41 PM, wasuthm1 wrote:

jjmckenzie wrote:
On 5/1/11 4:04 PM, wasuthm1 wrote:
What version of .NET does LISA require?

If it is .NET 1.1 or 2.0 you can try installing the native version.

If it is .NET 3.0, 3.5 or 4.0 try Mono.

http://wiki.winehq.org/winetricks describes what winetricks is and how
to use it.

James McKenzie
===
Microsoft .Net 2.0 and XNA 3.1. The installer will prompt to download them if they are not present.
===
When I installed It, it prompted to install XNA 3.1.
After installing XNA 3.1 as suggested, then the installation was successful.
But when I run, I got mono message.

I will try to install .net 2.0 first then mono

Install only one of them. Mono will conflict with .NET 2.0 and vice
versa. .NET 2.0 should work well. Mono adds additional functionality
of items outside of .NET.

James McKenzie

madewokherd · Post by **madewokherd** » Sun May 01, 2011 10:14 pm

Install only one of them. Mono will conflict with .NET 2.0 and vice versa.
.NET 2.0 should work well. Mono adds additional functionality of items
outside of .NET.

If both are installed then only .NET will be used. There's no problem
with this, but it means there's no reason to install mono after .NET.

Also, Mono 2.6 includes support for .NET 1.1 (but not 4.0). That still
works, and Mono developers are still updating the 2.6 branch.

wasuthm1 · Post by **wasuthm1** » Fri May 06, 2011 6:07 am

After installing dotnet20 using winetricks LISA can be run and appeared on the screen. however all icons under the menu bar are not visible but replaced by red cross along the bar. Also an error windows pop up.
How can I fix this.

jjmckenzie · Post by **jjmckenzie** » Sat May 07, 2011 6:08 pm

On 5/6/11 4:07 AM, wasuthm1 wrote:

After installing dotnet20 using winetricks LISA can be run and appeared on the screen. however all icons under the menu bar are not visible but replaced by red cross along the bar.

This means the icon file cannot be read or is not present.

Also an error windows pop up.

What does the error window say?

James McKenzie

wasuthm1 · Post by **wasuthm1** » Tue May 10, 2011 7:43 pm

jjmckenzie wrote:On 5/6/11 4:07 AM, wasuthm1 wrote:
What does the error window say?

James McKenzie

This is what appeared in the window:
==
An error has occurred in LISA:
Not implemented.

at
System, Drawing, Drawing 2D, LinearGradientBrush, TranslateTransform(Single
dx, Single dy, Matrixorder order)
==

Akenathon71 · Post by **Akenathon71** » Sun Sep 18, 2011 3:43 pm

Hi All at wine team. I try to install lisa fet 7.6.0 on wine 1.2.2 running on ubuntu 10.04 lts 64 bit. All starting requiriments of lisa are satisfied (.net 2.0, xna and Shader Model 1.1) but when i click on "next" setup stops with this error message in shell window:

X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 140 (ATIFGLEXTENSION)
Minor opcode of failed request: 74 ()
Value in failed request: 0x4e00002
Serial number of failed request: 6216
Current serial number in output stream: 6216

is there anything i can do? i think that the problem is with my ATI HD 3870 card...Thanks a lot in advance and compliments for your work with wine!

David Bailey · Post by **David Bailey** » Mon Sep 19, 2011 11:13 am

I would definitely try installing wine3.1 (you probably have to uninstall wine first). This is the development version, but it contains many many fixes. For example Windows Mathematica 7 works well with Wine 3.1, but not with 2.0.

If the worst came to the worst, you could always deinstall wine3.1 and return to the old version.

David

John Drescher · Post by **John Drescher** » Mon Sep 19, 2011 11:17 am

I would definitely try installing wine3.1 (you probably have to uninstall wine first). This is the development version, but it contains many many fixes. For example Windows Mathematica 7 works well with Wine 3.1, but not with 2.0.

If the worst came to the worst, you could always deinstall wine3.1 and return to the old version.

You mean wine 1.3.X versus wine 1.2.x

There is no wine 2.0 or 3.X

John

Islevi · Post by **Islevi** » Thu Sep 22, 2011 4:03 am

You are right, the latest verion is http://www.winehq.org/news/2011090901 that was released 2 weeks ago...