error while installing orcad

metajemo · Post by **metajemo** » Fri Feb 20, 2009 7:44 pm

hello guys

i am using ubuntu 8.1, wine 1.0.1
i've tryed to install orcad v15.7.
the setup menu consists of three buttons:
Set Up Licensing - that installs the licence manager, needy for the program later when it prompts for the licence file.however while trying to install it i get the following message:
The network protocols installed on this computer either cannot be detected or are incapatible with the FLEXlm license manager
You must install TCP/IP before the FLEXlm license manager can be installed
...
going onto the second butten of the setup menu -Install Products - installs orcad fine and it works great accept for a tiny problem:since it doesnt have a licence.dat key most of the programs in the package cannot be run unless the key exists.in order to get the key to work it needs the licence manager to be installed
does anybody have an idea how to fix the error

austin987 · Post by **austin987** » Fri Feb 20, 2009 11:58 pm

On Sat, Feb 21, 2009 at 12:44 AM, metajemo <[email protected]> wrote:

hello guys [Exclamation]
i am using ubuntu 8.1, wine 1.0.1
i've tryed to install orcad v15.7.
the setup menu consists of three buttons:
Set Up Licensing - that installs the licence manager, needy for the program later when it prompts for the licence file.however while trying to install it i get the following message:
The network protocols installed on this computer either cannot be detected or are incapatible with the FLEXlm license manager
You must install TCP/IP before the FLEXlm license manager can be installed
...
going onto the second butten of the setup menu -Install Products - installs orcad fine and it works great accept for a tiny problem:since it doesnt have a licence.dat key most of the programs in the package cannot be run unless the key exists.in order to get the key to work it needs the licence manager to be installed
does anybody have an idea how to fix the error [Question]

Terminal output?

Try upgrading to development release, wine 1.1.15.

--
-Austin

metajemo · Post by **metajemo** » Sat Feb 21, 2009 3:21 am

>Terminal output?
>
>Try upgrading to development release, wine 1.1.15.
>
>--
>-Austin
No, it's not a terminal output.It's a visual message after the installation of the product has started...
I've upgrated the release version, still I get the same message.

Gert van den Berg · Post by **Gert van den Berg** » Sat Feb 21, 2009 3:30 am

On Sat, Feb 21, 2009 at 10:21 AM, metajemo <[email protected]> wrote:

Terminal output?

Try upgrading to development release, wine 1.1.15.

--
-Austin
No, it's not a terminal output.It's a visual message after the installation of the product has started...
I've upgrated the release version, still I get the same message.

Run it from the terminal and post the output. It might give an idea of
how the program is determining the state of TCP/IP

http://wiki.winehq.org/FAQ#head-3b297df ... b8edc21619

Gert

metajemo · Post by **metajemo** » Sat Feb 21, 2009 9:29 am

that's a great idea!
here's the results
metajemo@metajemo-laptop:~/orcad$ wine setup.exe
fixme:ntoskrnl:IoGetConfigurationInformation partial stub
err:winedevice:ServiceMain driver L"hardlock" failed to load
err:winedevice:ServiceMain driver L"Haspnt" failed to load
wine: Call from 0x7b844fc0 to unimplemented function ntoskrnl.exe.IoQueryDeviceDescription, aborting
wine: Unimplemented function ntoskrnl.exe.IoQueryDeviceDescription called at address 0x7b844fc0 (thread 002a), starting debugger...
Unhandled exception: unimplemented function ntoskrnl.exe.IoQueryDeviceDescription called in 32-bit code (0x7b845036).
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b
EIP:7b845036 ESP:7ec6363c EBP:7ec636a0 EFLAGS:00200246( - 00 - IZP1)
EAX:7b82eed5 EBX:7b8b4df8 ECX:00000000 EDX:7ec636c4
ESI:7ec636c4 EDI:00460200
Stack dump:
0x7ec6363c: 7ec636c4 00000008 00000000 00000000
0x7ec6364c: 80000100 00000001 00000000 7b844fc0
0x7ec6365c: 00000002 7edfbca0 7edfdea1 00000000
0x7ec6366c: 00000000 00000000 00000000 00000000
0x7ec6367c: 00000000 00000000 00000000 00000000
0x7ec6368c: 00000000 00000000 00000000 00000000
Backtrace:
=>0 0x7b845036 in kernel32 (+0x25036) (0x7ec636a0)
1 0x7edfbc46 in ntoskrnl (+0x1bc46) (0x7ec636d0)
2 0x7edf377c in ntoskrnl (+0x1377c) (0x7ec639d8)
3 0x7ee4fe27 in advapi32 (+0x2fe27) (0x7ec63a28)
4 0x7bc714be call_thread_entry_point+0xe() in ntdll (0x7ec63a38)
5 0x7bc715e2 in ntdll (+0x615e2) (0x7ec63ad8)
6 0x7bc72492 in ntdll (+0x62492) (0x7ec643c8)
7 0xb7e2250f start_thread+0xbf() in libpthread.so.0 (0x7ec644c8)
8 0xb7d9ea0e __clone+0x5e() in libc.so.6 (0x00000000)
0x7b845036: movl 0xfffffffc(%ebp),%ebx
Modules:
Module Address Debug info Name (26 modules)
PE 450000- 462a00 Deferred sentinel.sys
ELF 7b800000-7b93c000 Export kernel32<elf>
\-PE 7b820000-7b93c000 \ kernel32
ELF 7bc00000-7bcad000 Export ntdll<elf>
\-PE 7bc10000-7bcad000 \ ntdll
ELF 7bf00000-7bf03000 Deferred <wine-loader>
ELF 7eb3e000-7eb54000 Deferred hal<elf>
\-PE 7eb40000-7eb54000 \ hal
ELF 7ec65000-7ecca000 Deferred rpcrt4<elf>
\-PE 7ec70000-7ecca000 \ rpcrt4
ELF 7eddb000-7ee14000 Export ntoskrnl<elf>
\-PE 7ede0000-7ee14000 \ ntoskrnl
ELF 7ee14000-7ee68000 Export advapi32<elf>
\-PE 7ee20000-7ee68000 \ advapi32
ELF 7ee68000-7ee81000 Deferred libnsl.so.1
ELF 7ee81000-7ee8a000 Deferred libnss_compat.so.2
ELF 7ee8e000-7eea2000 Deferred winedevice<elf>
\-PE 7ee90000-7eea2000 \ winedevice
ELF 7efc2000-7efe8000 Deferred libm.so.6
ELF 7efe9000-7eff5000 Deferred libnss_files.so.2
ELF 7eff5000-7f000000 Deferred libnss_nis.so.2
ELF b7cb9000-b7cbd000 Deferred libdl.so.2
ELF b7cbd000-b7e1b000 Export libc.so.6
ELF b7e1c000-b7e35000 Export libpthread.so.0
ELF b7e4d000-b7f88000 Deferred libwine.so.1
ELF b7f8a000-b7fa7000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
00000008
00000009 0
0000000a
0000000b 0
0000000c
00000029 0
00000023 0
00000019 0
00000013 0
00000012 0
0000000e 0
0000000d 0
0000000f
00000014 0
00000011 0
00000010 0
00000020
00000025 0
00000024 0
00000022 0
00000021 0
00000026 (D) C:\windows\system32\winedevice.exe
0000002a 0 <==
00000028 0
00000027 0
Backtrace:
=>0 0x7b845036 in kernel32 (+0x25036) (0x7ec636a0)
1 0x7edfbc46 in ntoskrnl (+0x1bc46) (0x7ec636d0)
2 0x7edf377c in ntoskrnl (+0x1377c) (0x7ec639d8)
3 0x7ee4fe27 in advapi32 (+0x2fe27) (0x7ec63a28)
4 0x7bc714be call_thread_entry_point+0xe() in ntdll (0x7ec63a38)
5 0x7bc715e2 in ntdll (+0x615e2) (0x7ec63ad8)
6 0x7bc72492 in ntdll (+0x62492) (0x7ec643c8)
7 0xb7e2250f start_thread+0xbf() in libpthread.so.0 (0x7ec644c8)
8 0xb7d9ea0e __clone+0x5e() in libc.so.6 (0x00000000)
wine: Call from 0x7b844fc0 to unimplemented function ntoskrnl.exe.IoQueryDeviceDescription, aborting
wine: Call from 0x7b844fc0 to unimplemented function ntoskrnl.exe.IoQueryDeviceDescription, aborting
metajemo@metajemo-laptop:~/orcad$ fixme:reg:GetNativeSystemInfo (0x331510) using GetSystemInfo()
err:ole:get_unmarshaler_from_stream Failed to read common OBJREF header, 0x00000000
err:ole:dispatch_rpc no apartment found for ipid {ffffffff-ffff-ffff-3200-00002f000000}
err:rpc:I_RpcReceive we got fault packet with status 0x80010108
err:ole:dispatch_rpc no apartment found for ipid {ffffffff-ffff-ffff-3200-00002f000000}
err:rpc:I_RpcReceive we got fault packet with status 0x80010108
err:ole:dispatch_rpc no apartment found for ipid {ffffffff-ffff-ffff-3200-00002f000000}
err:rpc:I_RpcReceive we got fault packet with status 0x80010108
err:ole:dispatch_rpc no apartment found for ipid {ffffffff-ffff-ffff-3200-00002f000000}
err:rpc:I_RpcReceive we got fault packet with status 0x80010108

the messages in the end repeat cause i've tryied the instalation twice, then i left the setup manager

Gert van den Berg · Post by **Gert van den Berg** » Sun Feb 22, 2009 12:12 pm

On Sat, Feb 21, 2009 at 4:29 PM, metajemo <[email protected]> wrote:

that's a great idea!

That was what Austin meant...

PE 450000- 462a00 Deferred sentinel.sys

THat looks like a copy-protection dongle driver....

If you've got lots of time, you might give the USB patches a try and
compile a Wine version with them... Doesn't look really useful
though...

http://wiki.winehq.org/USB

If there is an option to get a non-dongle protected version, that
might help as well...

A Linux version of FlexLM exists as well, which might simplify the
license manager setup. No idea where it can be found though...

Gert

pd123 · Post by **pd123** » Sun May 29, 2011 3:53 am

I get this message when i try to launch the setup of OrCAD version 10.0. I have wive version 1.2.

[quote]Archive: /media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe
[/media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
zipinfo: cannot find zipfile directory in one of /media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe or
/media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe.zip, and cannot find /media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe.ZIP, period.
[/quote]

Can anybody tell me what should I do?

triso · Post by **triso** » Tue May 31, 2011 4:24 pm

Here's something I found while searching with google: http://www.cedt.iisc.ernet.in/people/st ... gOrcad.pdf

sq123456 · Post by **sq123456** » Wed Jun 01, 2011 11:03 pm

Try to upgrade to develop version

jjmckenzie · Post by **jjmckenzie** » Thu Jun 02, 2011 4:07 am

pd123 wrote:I get this message when i try to launch the setup of OrCAD version 10.0. I have wive version 1.2.

Archive: /media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe
[/media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
zipinfo: cannot find zipfile directory in one of /media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe or
/media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe.zip, and cannot find /media/5CFC92BDFC9290BE/Documents and Settings/Bhuved/Desktop/ORCAD_10 (D)/ORCAD_10 (D)/Setup.exe.ZIP, period.
Can anybody tell me what should I do?

This appears to be an incomplete download of the installer file. You might want to try and fetch it again from the official site or (if this is a FOSS program or other freeware) CNet like distribution site. Do not try to install WAReZ on your system. Wine is very capable of running Windows malware programs.