"print from anywhere" program installation failed

[MR_SN0WY]

Hello all,
My college uses a "print from anywhere" program to use their printers, but it doesn't seem to install under wine. I believe the error is that there's no print spooler service in wine. Does anyone know any information that could lead to a successful installation?
These lines stuck out in the logfile:

Code: Select all

[2016/09/30 10:45:03.139 P024 T025 Controller] [CRunModule::CRunModule] Create: cmdline = ""C:\users\matt\Temp\Pharos\CheckModule.exe" /s"
[2016/09/30 10:45:04.338 P024 T025 Controller] -> CRunModule::GetResultFile
[2016/09/30 10:45:04.339 P024 T025 Controller] [CRunModule::GetResultFile] Result.txt file = "1Error: The Print Spooler service is not running.  The Windows Print Spooler service needs to be running to install this component.

Code: Select all

[2016/11/26 11:21:26.024 P02C T031 Controller] <- CStepDownloaderHttp::CStepDownloaderHttp
[2016/11/26 11:21:26.026 P02C T031 Controller] CFileRetriever::ThreadProc] A CException was caught: ""
[2016/11/26 11:21:26.027 P02C T031 Controller] <- CFileRetriever::ThreadProc
[2016/11/26 11:21:26.041 P02C T02D Controller] -> CFileRetriever::WaitForThreadToDie
[2016/11/26 11:21:26.042 P02C T02D Controller] <- CFileRetriever::WaitForThreadToDie
[2016/11/26 11:21:26.058 P02C T02D Controller] -> CStepChecking::DoRun
[2016/11/26 11:21:26.058 P02C T02D Controller] -> CUtility::GetEnvironment
[2016/11/26 11:21:26.059 P02C T02D Controller] [CUtility::GetEnvironment] Environment = x64
[2016/11/26 11:21:26.059 P02C T02D Controller] <- CUtility::GetEnvironment
[2016/11/26 11:21:26.059 P02C T02D Controller] <- CStepChecking::DoRun
[2016/11/26 11:21:26.059 P02C T02D Controller] [CRunInstructions::DoStep] A PSException was caught: "Could not find the package "Labs-Open-OffCampusLab-q" on the server manifest. It may have been deleted. Try downloading the package again or contact an administrator."
[2016/11/26 11:21:29.458 P02C T02D Controller] [CControllerApp::KillFileLog]

I attached the error log and the "print from anywhere" program can be downloaded from here.
Also, my college is "Rowan University" if it helps any.
Thanks and 73, -Snowy

[Bob Wya]

@MR_SN0WY,

The log you've supplied isn't terribly useful - without the Wine console log... See WineHQ FAQ: 10.1.1 How can I get a debugging log (a.k.a. terminal output)? ...

Also it appears to have slipped your mind to mention:

• the Linux distribution you are using?
• are you using Wine or Wine-Staging (additional staged patchset)?
• the Wine version you are using?

Ta
Bob

[MR_SN0WY]

Oops, sorry, stupid mistake.

Linux distro: Gallium OS 2 (4.4.6-galliumos 2)
Wine version: 1.6.2 (1:1.6.2-0ubuntu14)
Wine staging?: Nope, not at the moment

Unfortunately I can't provide a wine console log at the moment, I'll get back to you about this.

Anything else I can provide that would help?
Thanks again
-Snowy

[Bob Wya]

@MR_SN0WY

As Wine version 1.6.2 is obsolete... I'd recommend upgrading, using the official WineHQ PPA ...
See if installing the latest development branch (1.9.24) makes any difference to your installation problems.
If there are still issues - do remember to post the Wine console logs (not the printer applications logs)!!

Ta
Bob

[MR_SN0WY]

Ok i got the log file. I also updated wine to 1.9.23 before this.

Code: Select all

fixme:nls:GetThreadPreferredUILanguages 00000038, 0x32f9e0, 0x32f9f0 0x32f9e4
fixme:nls:get_dummy_preferred_ui_language (0x38 0x32f9e0 0x32f9f0 0x32f9e4) returning a dummy value (current locale)
fixme:module:load_library unsupported flag(s) used (flags: 0x00000060)
fixme:module:load_library unsupported flag(s) used (flags: 0x00000060)
fixme:shell:InitNetworkAddressControl stub
fixme:ver:GetCurrentPackageId (0x83e9d8 (nil)): stub
fixme:nls:GetThreadPreferredUILanguages 00000038, 0x33d5a0, 0x33d5b0 0x33d5a4
fixme:nls:get_dummy_preferred_ui_language (0x38 0x33d5a0 0x33d5b0 0x33d5a4) returning a dummy value (current locale)
fixme:module:load_library unsupported flag(s) used (flags: 0x00000060)
fixme:module:load_library unsupported flag(s) used (flags: 0x00000060)
fixme:shell:SHChangeNotify ignoring unsupported flags: 2001
fixme:ieframe:PersistStreamInit_InitNew (0x1bd198)
fixme:ieframe:navigate_url Unsupported args (Flags 0x32e890 {VT_I4: 0}; TargetFrameName 0x32e880 {VT_BSTR: (null)})
err:winediag:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path. Usually, you can find it in the winbind package of your distribution.
fixme:dwmapi:DwmIsCompositionEnabled 0x6d5d3018
fixme:iphlpapi:NotifyIpInterfaceChange (family 0, callback 0x6a0cb608, context 0xff84a8, init_notify 0, handle 0x172e794): stub
fixme:msctf:ThreadMgrSource_AdviseSink (0xc49df0) Unhandled Sink: {71c6e74e-0f28-11d8-a82a-00065b84435c}
9[fa16c8]: TSF: 0x3845270 TSFStaticSink::Init() FAILED to install ITfInputProcessorProfileActivationSink (0x80004001)
9[fa16c8]: TSF:   TSFTextStore::Initialize() FAILED to initialize TSFStaticSink instance
fixme:imm:ImmGetDescriptionW (0x4090409, (nil), 0): semi stub
fixme:imm:ImmGetDescriptionW (0x4090409, 0x38452b0, 9): semi stub
fixme:module:load_library unsupported flag(s) used (flags: 0x00000800)
fixme:imm:ImmGetOpenStatus (0xc4c088): semi-stub
fixme:imm:ImmReleaseContext (0x2006c, 0xc4c088): stub
fixme:ntdll:NtLockFile I/O completion on lock not implemented yet
fixme:ieframe:BrowserService_GetTravelLog 0xc51320 0x32c578
fixme:ieframe:ClientSite_GetContainer (0x1bd264)->(0x32c538)
fixme:mshtml:nsChannel_GetContentDisposition (0xc530f8)->(0x32bd78)
fixme:mshtml:nsChannel_GetContentDispositionHeader (0xc530f8)->(0x32b4cc)
fixme:ieframe:ClientSite_GetContainer (0x1bd264)->(0x32d338)
fixme:win:EnumDisplayDevicesW ((null),0,0x32c9c4,0x00000000), stub!
fixme:ieframe:DocHostUIHandler_GetDropTarget (0x1bd264)
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 2d1400 (device=2d access=0 func=500 method=0)
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 2d1400 (device=2d access=0 func=500 method=0)
fixme:mountmgr:harddisk_ioctl Unsupported ioctl 2d1400 (device=2d access=0 func=500 method=0)
fixme:ntdll:EtwRegisterTraceGuidsW (0x69edfc08, 0x3fa73d0, {509962e0-406b-46f4-99ba-5a009f8d2225}, 3, 0x415bf28, (null), (null), 0x3fa7400): stub
fixme:ntdll:EtwRegisterTraceGuidsW   register trace class {a3da04e0-57d7-482a-a1c1-61da5f95bacb}
fixme:ntdll:EtwRegisterTraceGuidsW   register trace class {917b96b1-ecad-4dab-a760-8d49027748ae}
fixme:ntdll:EtwRegisterTraceGuidsW   register trace class {26d1e091-0ae7-4f49-a554-4214445c505c}
fixme:ieframe:PropertyNotifySink_OnChanged unimplemented dispid 1005
fixme:ieframe:ControlSite_OnFocus (0x1bd264)->(1)
fixme:msctf:SetInputScopes STUB: 0x2008c ... (null) (null)
fixme:msctf:SetInputScopes STUB: 0x2008c ... (null) (null)
fixme:ieframe:ControlSite_OnFocus (0x1bd264)->(0)
fixme:ieframe:InPlaceSite_OnInPlaceDeactivateEx fNoRedraw (1) ignored
fixme:mshtml:HlinkTarget_SetBrowseContext (0xa41bb0)->((nil))
fixme:ieframe:OleInPlaceObject_InPlaceDeactivate (0x1bd198)

Is there anything else I can provide?
Thanks,
-Matt