Daz Bryce 6.0 not opening

[nomadcelt]

Has anyone had any luck with Bryce 6.0?

I can fully install it as well as the extras that come with it but it will not run.

I have played around with settings in winecfg but nothing.

I am running Wine 1.0.0 under Mepis Linux 7 (Debian Etch base)

Any takers?

[Dotan Cohen]

2008/6/20 nomadcelt <[email protected]>:

Has anyone had any luck with Bryce 6.0?

You really should write to Daz 3D and let them know that there is
demand for their product in Linux. Here is their contact page:
http://www.daz3d.com/i.x/support/rnlogi ... td_alp.php

You will need to present the contact info (name and email address)
that you supplied when you registered Bryce.

Dotan Cohen

http://what-is-what.com
http://gibberish.co.il
×

[dimesio]

Has anyone had any luck with Bryce 6.0?

I can fully install it as well as the extras that come with it but it will not run.

I have played around with settings in winecfg but nothing.

I am running Wine 1.0.0 under Mepis Linux 7 (Debian Etch base)

Any takers?

That's not enough information for anyone to help you. Exactly what happens when you try to run it? What settings have you tried in winecfg?

Run it from a terminal, and post the terminal output.

[nomadcelt]

Has anyone had any luck with Bryce 6.0?

I can fully install it as well as the extras that come with it but it will not run.

I have played around with settings in winecfg but nothing.

I am running Wine 1.0.0 under Mepis Linux 7 (Debian Etch base)

Any takers?

That's not enough information for anyone to help you. Exactly what happens when you try to run it? What settings have you tried in winecfg?

Run it from a terminal, and post the terminal output.

Many thanks. The output is:

wine: Call from 0x7b8425a0 to unimplemented function ntoskrnl.exe.KeInitializeMutex, aborting
wine: Unimplemented function ntoskrnl.exe.KeInitializeMutex called at address 0x7b8425a0 (thread 0014), starting debugger...
Unhandled exception: unimplemented function ntoskrnl.exe.KeInitializeMutex called in 32-bit code (0x7b842633).
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b
EIP:7b842633 ESP:7ed648c4 EBP:7ed64938 EFLAGS:00000202( - 00 - - I1)
EAX:7b82c311 EBX:7b8b229c ECX:00000000 EDX:00000004
ESI:7ed64958 EDI:7ed648ec
Stack dump:
0x7ed648c4: 00450000 7ed648d4 0000005c 80000100
0x7ed648d4: 00000001 00000000 7b8425a0 00000002
0x7ed648e4: 7ef3cc00 7ef3fb30 00000000 00000000
0x7ed648f4: 00000000 00000000 00000000 00000000
0x7ed64904: 00000000 00000000 00000000 00000000
0x7ed64914: 00000001 7ed64958 00451b7c 00000020
Backtrace:
=>1 0x7b842633 RaiseException+0x93() in kernel32 (0x7ed64938)
2 0x7ef3cb97 in ntoskrnl (+0xcb97) (0x7ed64958)
3 0x7ef367bc in ntoskrnl (+0x67bc) (0x7ed64998)
4 0xb7e9b061 in winedevice (+0xb061) (0x7ed64a58)
5 0x7ef8e109 in advapi32 (+0x2e109) (0x7ed64a98)
6 0x7bc6a7ce call_thread_entry_point+0xe() in ntdll (0x7ed64aa8)
7 0x7bc6b662 in ntdll (+0x5b662) (0x7ed64b58)
8 0x7bc6c16c in ntdll (+0x5c16c) (0x7ed65458)
9 0xb7e7b0bd start_thread+0x6d() in libpthread.so.0 (0x7ed654c8)
10 0xb7e1001e __clone+0x5e() in libc.so.6 (0x00000000)
0x7b842633 RaiseException+0x93 in kernel32: subl $4,%esp
Modules:
Module Address Debug info Name (31 modules)
PE 450000- 454680 Deferred elbycdio.sys
ELF 7b800000-7b92c000 Export kernel32<elf>
\-PE 7b820000-7b92c000 \ kernel32
ELF 7bc00000-7bca5000 Export ntdll<elf>
\-PE 7bc10000-7bca5000 \ ntdll
ELF 7bf00000-7bf03000 Deferred <wine-loader>
ELF 7ebda000-7ebef000 Deferred hal<elf>
\-PE 7ebe0000-7ebef000 \ hal
ELF 7ebef000-7ec56000 Deferred msvcrt<elf>
\-PE 7ec00000-7ec56000 \ msvcrt
ELF 7ed66000-7ed79000 Deferred libresolv.so.2
ELF 7ed8d000-7edac000 Deferred iphlpapi<elf>
\-PE 7ed90000-7edac000 \ iphlpapi
ELF 7edac000-7ee0d000 Deferred rpcrt4<elf>
\-PE 7edc0000-7ee0d000 \ rpcrt4
ELF 7ef1d000-7ef55000 Export ntoskrnl<elf>
\-PE 7ef30000-7ef55000 \ ntoskrnl
ELF 7ef55000-7efa6000 Export advapi32<elf>
\-PE 7ef60000-7efa6000 \ advapi32
ELF 7efa6000-7efb1000 Deferred libnss_files.so.2
ELF 7efb1000-7efc7000 Deferred libnsl.so.1
ELF 7efc7000-7efec000 Deferred libm.so.6
ELF 7eff6000-7f000000 Deferred libnss_nis.so.2
ELF b7d36000-b7d3f000 Deferred libnss_compat.so.2
ELF b7d40000-b7d44000 Deferred libdl.so.2
ELF b7d44000-b7e76000 Export libc.so.6
ELF b7e76000-b7e88000 Export libpthread.so.0
ELF b7e89000-b7e9d000 Export winedevice<elf>
\-PE b7e90000-b7e9d000 \ winedevice
ELF b7e9d000-b7fd3000 Deferred libwine.so.1
ELF b7fd5000-b7fec000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
00000008
00000009 0
0000000a
0000000b 0
0000000c
00000013 0
00000012 0
0000000e 0
0000000d 0
0000000f (D) c:\windows\system32\winedevice.exe
00000014 0 <==
00000011 0
00000010 0
Backtrace:
=>1 0x7b842633 RaiseException+0x93() in kernel32 (0x7ed64938)
2 0x7ef3cb97 in ntoskrnl (+0xcb97) (0x7ed64958)
3 0x7ef367bc in ntoskrnl (+0x67bc) (0x7ed64998)
4 0xb7e9b061 in winedevice (+0xb061) (0x7ed64a58)
5 0x7ef8e109 in advapi32 (+0x2e109) (0x7ed64a98)
6 0x7bc6a7ce call_thread_entry_point+0xe() in ntdll (0x7ed64aa8)
7 0x7bc6b662 in ntdll (+0x5b662) (0x7ed64b58)
8 0x7bc6c16c in ntdll (+0x5c16c) (0x7ed65458)
9 0xb7e7b0bd start_thread+0x6d() in libpthread.so.0 (0x7ed654c8)
10 0xb7e1001e __clone+0x5e() in libc.so.6 (0x00000000)
wine: Call from 0x7b8425a0 to unimplemented function ntoskrnl.exe.KeInitializeQueue, aborting
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\Program Files\\DAZ\\Bryce 6\\B6Axiom.dll") not found
err:module:import_dll Library B6Axiom.dll (which is needed by L"C:\\Program Files\\DAZ\\Bryce 6\\Bryce6.exe") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\Program Files\\DAZ\\Bryce 6\\B6Axiom.dll") not found
err:module:import_dll Library B6Axiom.dll (which is needed by L"C:\\Program Files\\DAZ\\Bryce 6\\B6ImageIO.dll") not found
err:module:import_dll Library B6ImageIO.dll (which is needed by L"C:\\Program Files\\DAZ\\Bryce 6\\Bryce6.exe") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\Program Files\\DAZ\\Bryce 6\\amberkrn.dll") not found
err:module:import_dll Library amberkrn.dll (which is needed by L"C:\\Program Files\\DAZ\\Bryce 6\\Bryce6.exe") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\Program Files\\DAZ\\Bryce 6\\Bryce6.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program Files\\DAZ\\Bryce 6\\Bryce6.exe" failed, status c0000135


I suspect (with little knowledge that I have) that the most of the problem comes from not being able to find the DLLs that it requires. All of those dll's and files are in the folder that it mentions.

What do I need to do? Am keen to learn.

[nomadcelt]

Further to above, I found that MSVCP60.DLL was missing. I downloaded it and put it in the same directory. Ialso turned off the ALSA Audio option in winecfg and ran it again.This time Bryce got further, loading a light blue screen before hanging. I quitted the application and the terminal output is below:

wine: Call from 0x7b8425a0 to unimplemented function ntoskrnl.exe.KeInitializeMutex, aborting
wine: Unimplemented function ntoskrnl.exe.KeInitializeMutex called at address 0x7b8425a0 (thread 001
4), starting debugger...
Unhandled exception: unimplemented function ntoskrnl.exe.KeInitializeMutex called in 32-bit code (0x
7b842633).
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b
EIP:7b842633 ESP:7ed518c4 EBP:7ed51938 EFLAGS:00000202( - 00 - - I1)
EAX:7b82c311 EBX:7b8b229c ECX:00000000 EDX:00000004
ESI:7ed51958 EDI:7ed518ec
Stack dump:
0x7ed518c4: 00450000 7ed518d4 00000060 80000100
0x7ed518d4: 00000001 00000000 7b8425a0 00000002
0x7ed518e4: 7ef29c00 7ef2cb30 00000000 00000000
0x7ed518f4: 00000000 00000000 00000000 00000000
0x7ed51904: 00000000 00000000 00000000 00000000
0x7ed51914: 00000001 7ed51958 00451b7c 00000020
Backtrace:
=>1 0x7b842633 RaiseException+0x93() in kernel32 (0x7ed51938)
2 0x7ef29b97 in ntoskrnl (+0x19b97) (0x7ed51958)
3 0x7ef237bc in ntoskrnl (+0x137bc) (0x7ed51998)
4 0x7effe061 in winedevice (+0xe061) (0x7ed51a58)
5 0x7ef7b109 in advapi32 (+0x2b109) (0x7ed51a98)
6 0x7bc6a7ce call_thread_entry_point+0xe() in ntdll (0x7ed51aa8)
7 0x7bc6b662 in ntdll (+0x5b662) (0x7ed51b58)
8 0x7bc6c16c in ntdll (+0x5c16c) (0x7ed52458)
9 0xb7dbe0bd start_thread+0x6d() in libpthread.so.0 (0x7ed524c8)
10 0xb7d5301e __clone+0x5e() in libc.so.6 (0x00000000)
0x7b842633 RaiseException+0x93 in kernel32: subl $4,%esp
Modules:
Module Address Debug info Name (31 modules)
PE 450000- 454680 Deferred elbycdio.sys
ELF 7b800000-7b92c000 Export kernel32<elf>
\-PE 7b820000-7b92c000 \ kernel32
ELF 7bc00000-7bca5000 Export ntdll<elf>
\-PE 7bc10000-7bca5000 \ ntdll
ELF 7bf00000-7bf03000 Deferred <wine-loader>
ELF 7ebc7000-7ebdc000 Deferred hal<elf>
\-PE 7ebd0000-7ebdc000 \ hal
ELF 7ebdc000-7ec43000 Deferred msvcrt<elf>
\-PE 7ebf0000-7ec43000 \ msvcrt
ELF 7ed53000-7ed66000 Deferred libresolv.so.2
ELF 7ed7a000-7ed99000 Deferred iphlpapi<elf>
\-PE 7ed80000-7ed99000 \ iphlpapi
ELF 7ed99000-7edfa000 Deferred rpcrt4<elf>
\-PE 7eda0000-7edfa000 \ rpcrt4
ELF 7ef0a000-7ef42000 Export ntoskrnl<elf>
\-PE 7ef10000-7ef42000 \ ntoskrnl
ELF 7ef42000-7ef93000 Export advapi32<elf>
\-PE 7ef50000-7ef93000 \ advapi32
ELF 7ef93000-7ef9e000 Deferred libnss_files.so.2
ELF 7ef9e000-7efa8000 Deferred libnss_nis.so.2
ELF 7efa8000-7efbe000 Deferred libnsl.so.1
ELF 7efbe000-7efc7000 Deferred libnss_compat.so.2
ELF 7efc7000-7efec000 Deferred libm.so.6
ELF 7efec000-7f000000 Export winedevice<elf>
\-PE 7eff0000-7f000000 \ winedevice
ELF b7c83000-b7c87000 Deferred libdl.so.2
ELF b7c87000-b7db9000 Export libc.so.6
ELF b7db9000-b7dcb000 Export libpthread.so.0
ELF b7de0000-b7f16000 Deferred libwine.so.1
ELF b7f18000-b7f2f000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
00000008
00000009 0
0000000a
0000000b 0
0000000c
00000013 0
00000012 0
0000000e 0
0000000d 0
0000000f (D) c:\windows\system32\winedevice.exe
00000014 0 <==
00000011 0
00000010 0
Backtrace:
=>1 0x7b842633 RaiseException+0x93() in kernel32 (0x7ed51938)
2 0x7ef29b97 in ntoskrnl (+0x19b97) (0x7ed51958)
3 0x7ef237bc in ntoskrnl (+0x137bc) (0x7ed51998)
4 0x7effe061 in winedevice (+0xe061) (0x7ed51a58)
5 0x7ef7b109 in advapi32 (+0x2b109) (0x7ed51a98)
6 0x7bc6a7ce call_thread_entry_point+0xe() in ntdll (0x7ed51aa8)
7 0x7bc6b662 in ntdll (+0x5b662) (0x7ed51b58)
8 0x7bc6c16c in ntdll (+0x5c16c) (0x7ed52458)
9 0xb7dbe0bd start_thread+0x6d() in libpthread.so.0 (0x7ed524c8)
10 0xb7d5301e __clone+0x5e() in libc.so.6 (0x00000000)
wine: Call from 0x7b8425a0 to unimplemented function ntoskrnl.exe.KeInitializeQueue, aborting


any ideas? I'd love to get this to work. It's really the only application keeping me tied to windows.

[dimesio]

I think this

wine: Call from 0x7b8425a0 to unimplemented function ntoskrnl.exe.KeInitializeMutex, aborting

means it's trying to load something that requires direct kernel access. At least, that's what I got from googling KeInitializMutex and trying to decipher http://msdn.microsoft.com/en-us/library/aa490233.aspx . I don't think that's something you can fix on your own, though someone with more expertise may be able to help you. (This is definitely way beyond my level.) You should probably file a bug report.

[dimesio]

I found a bug report for the same error message in connection with Final Fantasy 7 http://bugs.winehq.org/show_bug.cgi?id=13388 . You should probably add your info to that bug report. You should also add test results to the AppDB; currently there are no entries at all for Bryce 6.

[nomadcelt]

I went in to terminal and dropped in to superuser.

trying to run it now produces far more coherent errors, all of which refer to DLLs that are sat in the windows/system32 folder but which it is calling for in the DAZ/Bryce 6/ folder.

Is there a way to change the path so that it calls from the correct folders?

err:module:import_dll Library daz-qt-mt.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\dzwrapper.dll") not found
err:module:import_dll Library daz-qt-mt.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\daz-qsa.dll") not found
err:module:import_dll Library daz-qsa.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\dzcore.dll") not found
err:module:import_dll Library daz-qt-mt.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\dzcore.dll") not found
err:module:import_dll Library dzcore.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\dzwrapper.dll") not found
err:module:import_dll Library dzwrapper.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\Bryce6.exe") not found
err:module:import_dll Library daz-qt-mt.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\Bryce6.exe") not found
err:module:import_dll Library daz-qt-mt.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\daz-qsa.dll") not found
err:module:import_dll Library daz-qsa.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\dzcore.dll") not found
err:module:import_dll Library daz-qt-mt.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\dzcore.dll") not found
err:module:import_dll Library dzcore.dll (which is needed by L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\Bryce6.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"Z:\\home\\john\\.wine\\drive_c\\Program Files\\DAZ\\Bryce 6\\Bryce6.exe" failed, status c0000135

[vitamin]

I went in to terminal and dropped in to superuser.

DO NOT!!!
If you did that you broke Wine! Never use root to run Wine. EVER!
Remember that unlike broken by design platforms (such as dos and windows) by default creates files writable by everyone. Not so on *NIX. If another user (especially root) creates a file no one else can edit it (in most default configurations).

That said. You broke your Wine configuration. Remove ~/.wine directory (yes you will have to use 'sudo rm -rf ~/.wine' to remove all files your user can't touch.

[austin987]

On Sat, Jun 21, 2008 at 10:28 AM, dimesio <[email protected]> wrote:

I think this

wine: Call from 0x7b8425a0 to unimplemented function ntoskrnl.exe.KeInitializeMutex, aborting

means it's trying to load something that requires direct kernel access. At least, that's what I got from googling KeInitializMutex and trying to decipher http://msdn.microsoft.com/en-us/library/aa490233.aspx . I don't think that's something you can fix on your own, though someone with more expertise may be able to help you. (This is definitely way beyond my level.) You should probably file a bug report.

You might try disabling ntoskrnl in winecfg, or set windows mode to 9x.

[nomadcelt]

On Sat, Jun 21, 2008 at 10:28 AM, dimesio <[email protected]> wrote:

I think this

wine: Call from 0x7b8425a0 to unimplemented function ntoskrnl.exe.KeInitializeMutex, aborting

means it's trying to load something that requires direct kernel access. At least, that's what I got from googling KeInitializMutex and trying to decipher http://msdn.microsoft.com/en-us/library/aa490233.aspx . I don't think that's something you can fix on your own, though someone with more expertise may be able to help you. (This is definitely way beyond my level.) You should probably file a bug report.

You might try disabling ntoskrnl in winecfg, or set windows mode to 9x.

I've looked in winecfg to try and disable ntoskrnl but find no way of doing that. I tried running it in Win 98 mode but now the application simply hangs with a new (empty) window with no output to terminal.

With ref the post above about running as root, I ran the command you suggested. am I right in thinking that it only removes the files created by root that the current user can't use? All of my .wine directory is still there.