AutoCAD and Wine

ruelle · Post by **ruelle** » Thu Oct 09, 2008 5:36 am

mono 2.0 is out..
what about with autocad??

ruelle · Post by **ruelle** » Tue Oct 21, 2008 7:56 am

autoCAD 2004 + Wine 1.1.6:

an error during installation (vba??)
http://img134.imageshack.us/my.php?imag ... inegd9.jpg

ruelle@a7jc:~/.wine/drive_c/Programmi/AutoCAD 2004$ wine acad.exe
wine: Unhandled page fault on read access to 0x66666666 at address 0x7b853edb (thread 001c), starting debugger...
Unhandled exception: page fault on read access to 0x66666666 in 32-bit code (0x7b853edb).
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b
EIP:7b853edb ESP:7ec2a07c EBP:7ec2a0e4 EFLAGS:00010206( - 00 - RIP1)
EAX:00000001 EBX:7b8b4f68 ECX:7ec2a224 EDX:66666666
ESI:00000073 EDI:66666666
Stack dump:
0x7ec2a07c: 00000073 00000000 7ec2a168 b7e77a59
0x7ec2a08c: b7e77a59 00110048 0074006e b7e96f8e
0x7ec2a09c: 002e006c 006c0064 0000006c 7bc92fc4
0x7ec2a0ac: 00000001 7ee04d24 004525be 7ec2a0e8
0x7ec2a0bc: b7fb448c 7bc928a0 7ec2a104 b7e97042
0x7ec2a0cc: 7bc928a0 7ee01654 7edfff24 7edfe6a0
Backtrace:
=>1 0x7b853edb __wine_emulate_instruction+0x4b() in kernel32 (0x7ec2a0e4)
2 0x7edf27a2 in ntoskrnl (+0x127a2) (0x7ec2a104)
3 0x7bc3b497 in ntdll (+0x2b497) (0x7ec2a184)
4 0x7bc3b939 __regs_RtlRaiseException+0x29() in ntdll (0x7ec2a1f4)
5 0x7bc65d9c in ntdll (+0x55d9c) (0x7ec2a214)
6 0xdeadbabe (0x7ec2a584)
err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"cdac15ba.sys"
7 0x00451ddb in cdac15ba.sys (+0x1ddb) (0x7ec2a728)
8 0x7ee73320 in winedevice (+0x3320) (0x7ec2a9e8)
9 0x7ee48587 in advapi32 (+0x28587) (0x7ec2aa38)
10 0x7bc6bcae call_thread_entry_point+0xe() in ntdll (0x7ec2aa48)
11 0x7bc6c342 in ntdll (+0x5c342) (0x7ec2aae8)
12 0x7bc6c572 in ntdll (+0x5c572) (0x7ec2b3d8)
13 0xb7e724fb start_thread+0xcb() in libpthread.so.0 (0x7ec2b4c8)
0x7b853edb __wine_emulate_instruction+0x4b in kernel32: movzbl 0x0(%edx),%esi
Modules:
Module Address Debug info Name (27 modules)
PE 450000- 452bc0 Export cdac15ba.sys
ELF 7b800000-7b93c000 Export kernel32<elf>
\-PE 7b820000-7b93c000 \ kernel32
ELF 7bc00000-7bca6000 Export ntdll<elf>
\-PE 7bc10000-7bca6000 \ ntdll
ELF 7bf00000-7bf03000 Deferred <wine-loader>
ELF 7ec2c000-7ec3f000 Deferred libresolv.so.2
ELF 7ec3f000-7ec5e000 Deferred iphlpapi<elf>
\-PE 7ec50000-7ec5e000 \ iphlpapi
ELF 7ec5e000-7ecc3000 Deferred rpcrt4<elf>
\-PE 7ec70000-7ecc3000 \ rpcrt4
ELF 7edd4000-7ee0d000 Export ntoskrnl<elf>
\-PE 7ede0000-7ee0d000 \ ntoskrnl
ELF 7ee0d000-7ee61000 Export advapi32<elf>
\-PE 7ee20000-7ee61000 \ advapi32
ELF 7ee61000-7ee75000 Export winedevice<elf>
\-PE 7ee70000-7ee75000 \ winedevice
ELF 7ee75000-7ee80000 Deferred libnss_files.so.2
ELF 7ee80000-7ee98000 Deferred libnsl.so.1
ELF 7ee98000-7eea1000 Deferred libnss_compat.so.2
ELF 7efce000-7eff3000 Deferred libm.so.6
ELF 7eff6000-7f000000 Deferred libnss_nis.so.2
ELF b7d19000-b7d1d000 Deferred libdl.so.2
ELF b7d1d000-b7e6c000 Deferred libc.so.6
ELF b7e6d000-b7e85000 Export libpthread.so.0
ELF b7e92000-b7fc8000 Deferred libwine.so.1
ELF b7fca000-b7fe6000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
00000008
00000009 0
0000000c
00000020 0
0000001b 0
00000014 0
00000013 0
00000012 0
0000000e 0
0000000d 0
0000000f
00000017 0
00000016 0
00000015 0
00000011 0
00000010 0
00000018 (D) C:\windows\system32\winedevice.exe
0000001c 0 <==
0000001a 0
00000019 0
0000001d
00000022 0
00000021 0
0000001f 0
0000001e 0
00000023
00000024 0
00000025
00000026 0
Backtrace:
=>1 0x7b853edb __wine_emulate_instruction+0x4b() in kernel32 (0x7ec2a0e4)
2 0x7edf27a2 in ntoskrnl (+0x127a2) (0x7ec2a104)
3 0x7bc3b497 in ntdll (+0x2b497) (0x7ec2a184)
4 0x7bc3b939 __regs_RtlRaiseException+0x29() in ntdll (0x7ec2a1f4)
5 0x7bc65d9c in ntdll (+0x55d9c) (0x7ec2a214)
6 0xdeadbabe (0x7ec2a584)
7 0x00451ddb in cdac15ba.sys (+0x1ddb) (0x7ec2a728)
8 0x7ee73320 in winedevice (+0x3320) (0x7ec2a9e8)
9 0x7ee48587 in advapi32 (+0x28587) (0x7ec2aa38)
10 0x7bc6bcae call_thread_entry_point+0xe() in ntdll (0x7ec2aa48)
11 0x7bc6c342 in ntdll (+0x5c342) (0x7ec2aae8)
12 0x7bc6c572 in ntdll (+0x5c572) (0x7ec2b3d8)
13 0xb7e724fb start_thread+0xcb() in libpthread.so.0 (0x7ec2b4c8)
err:service:service_send_control service protocol error - failed to write pipe!
err:module:attach_process_dlls "adlmdll.dll" failed to initialize, aborting
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Programmi\\AutoCAD 2004\\acad.exe" failed, status c0000142

Usurp · Post by **Usurp** » Tue Oct 21, 2008 8:23 am

ruelle wrote:autoCAD 2004 + Wine 1.1.6:
an error during installation (vba??)
http://img134.imageshack.us/my.php?imag ... inegd9.jpg

err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"cdac15ba.sys"

according to http://www.neuber.com/taskmanager/proce ... a.sys.html
this is a CD copy protection.

vitamin · Post by **vitamin** » Tue Oct 21, 2008 8:37 am

Usurp wrote:
ruelle wrote:autoCAD 2004 + Wine 1.1.6:
an error during installation (vba??)
http://img134.imageshack.us/my.php?imag ... inegd9.jpg

err:dbghelp:pe_load_msc_debug_info -Debug info stripped, but no .DBG file in module L"cdac15ba.sys"
according to http://www.neuber.com/taskmanager/proce ... a.sys.html
this is a CD copy protection.

It is, and this particular bug is already fixed: http://bugs.winehq.org/show_bug.cgi?id=15551

ruelle · Post by **ruelle** » Tue Oct 21, 2008 8:58 am

vitamin wrote: It is, and this particular bug is already fixed: http://bugs.winehq.org/show_bug.cgi?id=15551

so I have to wait next release?

Thanks for your fast answer.

Fazer · Post by **Fazer** » Tue Oct 21, 2008 12:03 pm

ruelle wrote:so I have to wait next release?

This or compile Wine yourself.

ruelle · Post by **ruelle** » Tue Oct 28, 2008 4:15 pm

poll:When we will see AutoCAD install and run flawlessly on an out-of-the-box Wine installation??

=>more than 6 months..
=>1 year..
=>2 year..
=>more than 2 year..
=>never..

JMS · Post by **JMS** » Sun Nov 02, 2008 10:41 am

Hey everybody, it's been 3 months since the last time I posted. Now I'm using 2008 with 1.1.6 and it's perfect for me, the only important thing is the TTF text issue, but I'm getting used to the old fonts instead.

miciomax · Post by **miciomax** » Mon Nov 03, 2008 1:20 pm

JMS wrote:Hey everybody, it's been 3 months since the last time I posted. Now I'm using 2008 with 1.1.6 and it's perfect for me, the only important thing is the TTF text issue, but I'm getting used to the old fonts instead.

Not so many crashes as before ? Last time I tested it was with 1.1.4 and it was crashing often....

Max

JMS · Post by **JMS** » Mon Nov 03, 2008 3:43 pm

well, to be honest the licensing is not working because every two hours or so a message pops up saying that the licence is not valid and you have to restart, but it saves the work every time. When the help or "whats new" dialogs appear it crashes but I disabled both via registry. Layers dialog, the dashboard, properties dialog, everything fine.

ruelle · Post by **ruelle** » Tue Nov 04, 2008 7:20 am

why don't you add a test data and the other info for example how to disable the crash via registrya and the help?
thanks

miciomax · Post by **miciomax** » Tue Nov 04, 2008 8:32 am

JMS wrote:well, to be honest the licensing is not working because every two hours or so a message pops up saying that the licence is not valid and you have to restart, but it saves the work every time. When the help or "whats new" dialogs appear it crashes but I disabled both via registry. Layers dialog, the dashboard, properties dialog, everything fine.

Well, so nothing new

They're more or less the crashes that I found, also the licensing problem. Because of those I'll stay with 2005 and use 2008 just to convert newest dwg.

BTW, the only true annoying problem now is the TTF stuff.

Ciao

Max

JMS · Post by **JMS** » Tue Nov 04, 2008 9:22 am

[HKEY_CURRENT_USER\Software\Autodesk\AutoCAD\R17.1\ACAD-6001:409\FixedProfile\Application Window]

"Position"="178 61 1483 874"

"Show"=dword:00000001

[HKEY_CURRENT_USER\Software\Autodesk\AutoCAD\R17.1\ACAD-6001:409\Profiles\<<Unnamed Profile>>\Drawing Window]
"MoreHideWarningDialogs"=dword:00000200

These are the keys, the firs one is to avoid a small window that sometimes causes autocad to crash, change acording to your resolution
The other simply hides the "what's new" thing.

image01

image02

image03

As you can see I still get errors, i.e when clicking "customize", but it doesn't crash, I just receive an error and I can continue working.

I'm using a build from here

http://mike.kronenberg.org/

I don't know why using this build all is smooth and without crashes (I guess the libraries he includes are the solution). I tried to include some of the libs in my own build but with no success. I don't know how would be on Ubuntu, I'm sorry.

ruelle · Post by **ruelle** » Thu Nov 06, 2008 8:13 pm

something new about DIB Engine bug? (you know AutoCAD need to fix it!!)

http://bugs.winehq.org/show_bug.cgi?id=421

GeorgKloss · Post by **GeorgKloss** » Sun Nov 09, 2008 2:22 pm

Hello,
I finally managed to install version 2008 but cannot get it to run.
When I try to execute it I get error:

Code: Select all

err:module:attach_process_dlls "adlmdll.dll" failed to initialize, aborting
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program Files\\AutoCAD 2008\\acad.exe" failed, status c0000142

Of course adlmdll.dll is under Program Files/AutoCAD. For the test I tried to rename it and then I had different error about not found dll.
I see someone else had similar error, but I could not find the solution so far.

Hope some can lead me to correct path now.

Code: Select all

wine-1.1.8
Suse 11.0
Kernel: 2.6.25.18-0.2-default

austin987 · Post by **austin987** » Sun Nov 09, 2008 6:53 pm

On Sun, Nov 9, 2008 at 1:22 PM, GeorgKloss <[email protected]> wrote:

Hello,
I finally managed to install version 2008 but cannot get it to run.
When I try to execute it I get error:

err:module:attach_process_dlls "adlmdll.dll" failed to initialize, aborting
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program Files\\AutoCAD 2008\\acad.exe" failed, status c0000142

Of course adlmdll.dll is under Program Files/AutoCAD. For the test I tried to rename it and then I had different error about not found dll.
I see someone else had similar error, but I could not find the solution so far.

Hope some can lead me to correct path now.

Try:
'regsvr32 adlmdll.dll'

--
-Austin

GeorgKloss · Post by **GeorgKloss** » Mon Nov 10, 2008 3:54 am

~/.wine/drive_c/Program Files/AutoCAD 2008>regsvr32 adlmdll.dll
or
~/.wine/drive_c/Program Files/AutoCAD 2008>wine regsvr32 adlmdll.dll

result in: "Failed to load DLL adlmdll.dll"

austin987 · Post by **austin987** » Mon Nov 10, 2008 3:23 pm

On Mon, Nov 10, 2008 at 2:54 AM, GeorgKloss <[email protected]> wrote:

~/.wine/drive_c/Program Files/AutoCAD 2008>regsvr32 adlmdll.dll
or
~/.wine/drive_c/Program Files/AutoCAD 2008>wine regsvr32 adlmdll.dll

result in: "Failed to load DLL adlmdll.dll"

[Crying or Very sad]

Does that file exist?

--
-Austin

GeorgKloss · Post by **GeorgKloss** » Mon Nov 10, 2008 4:22 pm

Of course it exists, and is located in the same directory.

austin987 · Post by **austin987** » Mon Nov 10, 2008 8:04 pm

On Mon, Nov 10, 2008 at 3:22 PM, GeorgKloss <[email protected]> wrote:

Of course it exists, and is located in the same directory.

Then something's screwy. It may be missing other DLLs or it wasn't
installed properly.

--
-Austin

EF · Post by EF » Sat Nov 15, 2008 11:43 pm

Hi
I was able to install AutoCAD 2008 with no patches successfully but I cannot get it to run

Code: Select all

fixme:heap:HeapSetInformation 0x1c30000 0 0x32f99c 4
err:rpc:I_RpcGetBuffer no binding
fixme:advapi:RegisterEventSourceA ((null),"Autodesk SC"): stub
err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr 0x7bc368ef
err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr 0x7bc368ef

I am running darwine 1.1.8 from http://www.kronenberg.org/darwine/ on OS X Leopard 10.5.5
dotnet 2.0 mshtml3 corefonts gdiplus are installed
Tried with Xquartz / Apple's X11

JMS · Post by **JMS** » Sun Nov 16, 2008 6:31 am

Hi EF

Is this all you get on the terminal? Could you please paste your complete log?

I'm doing a new install in a clean wineprefix, I'll be back in an hour

JMS · Post by **JMS** » Sun Nov 16, 2008 6:58 am

Hey again... I did a clean installation and everything is fine for me:

Code: Select all

sh winetricks corefonts allfonts gecko msxml3 dotnet20 gdiplus firefox3 flash

(you don't need firefox but I always do this way)

and then

Code: Select all

wine /Users/***/.wine/drive_c/Program\ Files/AutoCAD\ 2008/acad.exe /nohardware

and this is what I get from the terminal

Code: Select all

Last login: Sun Nov 16 11:54:02 on ttys000
Computer:~ ***$ /Users/***/Desktop/Autocad_2008.command ; exit;
fixme:heap:HeapSetInformation 0x1100000 0 0x32f99c 4
fixme:advapi:CheckTokenMembership (0x0 0x149ce8 0x32fb14) stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x32f5ac,0x00000000), stub!
fixme:wtsapi:WTSRegisterSessionNotification Stub 0x10030 0x00000000
fixme:shell:IQueryAssociations_fnInit unsupported flags: 2

and then it will pop up the "Autocad is no longer the default app" bla bla window

then I get this

Code: Select all

fixme:shell:IQueryAssociations_fnInit unsupported flags: 2
fixme:font:WineEngCreateFontInstance Untranslated charset 255
fixme:appbar:handle_appbarmessage SHAppBarMessage(ABM_GETTASKBARPOS, hwnd=0x113aa10): stub
fixme:dciman:DCICreatePrimary 0x3ac 0x1e013a8
fixme:threadpool:RtlQueueWorkItem Flags 0x4 not supported
fixme:process:GetProcessWorkingSetSize (0xffffffff,0x32ebdc,0x32ebe0): stub
fixme:virtual:NtAllocateVirtualMemory MEM_WRITE_WATCH type not supported
fixme:ole:CoGetContextToken stub
fixme:shell:URL_ParseUrl failed to parse L"AcdbMgd"
fixme:reg:GetNativeSystemInfo (0x32e9d8) using GetSystemInfo()

And this is when the "activate or run" appears. I click run and:

Code: Select all

fixme:imm:ImmReleaseContext (0x1008c, 0x136b58): stub
fixme:shell:IShellLinkW_fnGetPath (0x1fe110): WIN32_FIND_DATA is not yet filled.
fixme:shell:IShellLinkW_fnGetPath (0x1fe110): WIN32_FIND_DATA is not yet filled.
fixme:shell:URL_ParseUrl failed to parse L"msvcm80"
fixme:shell:URL_ParseUrl failed to parse L"acmgd"
fixme:shell:URL_ParseUrl failed to parse L"acdbmgd"
fixme:shell:URL_ParseUrl failed to parse L""
fixme:heap:RtlCompactHeap (0x7eb0000, 0x1) stub
fixme:win:RegisterRawInputDevices (pRawInputDevices=0x32f220, uiNumDevices=1, cbSize=12) stub!
fixme:ole:CoResumeClassObjects stub
fixme:shell:URL_ParseUrl failed to parse L""
fixme:shell:URL_ParseUrl failed to parse L"AdInfoCenter"
fixme:shell:URL_ParseUrl failed to parse L"System.Windows.Forms"
fixme:shell:URL_ParseUrl failed to parse L"Autodesk.Interop.AcInetEngine"
fixme:shell:URL_ParseUrl failed to parse L"System"
fixme:shell:URL_ParseUrl failed to parse L"System.Drawing"
fixme:shell:URL_ParseUrl failed to parse L"acmgd"
fixme:shell:URL_ParseUrl failed to parse L"Accessibility"
fixme:win:EnumDisplayDevicesW ((null),0,0x32d8ac,0x00000000), stub!
fixme:shell:URL_ParseUrl failed to parse L"AdInfoCenter.resources"
fixme:shell:DllCanUnloadNow stub
fixme:shell:URL_ParseUrl failed to parse L""
fixme:shell:URL_ParseUrl failed to parse L"acmgdinternal"
fixme:shell:URL_ParseUrl failed to parse L"AcMgdShared"
fixme:shell:URL_ParseUrl failed to parse L"AcMgdShared"
fixme:shell:URL_ParseUrl failed to parse L"acmgdinternal"
fixme:shell:URL_ParseUrl failed to parse L"AcLayer.resources"
fixme:shell:URL_ParseUrl failed to parse L"AcLayer.resources"

And I'm in the drawing screen, all these errors have no effect, layers and everything else is OK.

Sorry for such a large post, but I need to know where are you at the moment.

austin987 · Post by **austin987** » Sun Nov 16, 2008 4:05 pm

On Sun, Nov 16, 2008 at 5:59 AM, JMS <[email protected]> wrote:

Hey again... I did a clean installation and everything is fine for me:

Code:
sh winetricks corefonts allfonts gecko msxml3 dotnet20 gdiplus firefox3 flash

(you don't need firefox but I always do this way)

and then

Code:
wine /Users/***/.wine/drive_c/Program\ Files/AutoCAD\ 2008/acad.exe /nohardware

cd to the directory first.

--
-Austin

ruelle · Post by **ruelle** » Sun Nov 16, 2008 8:13 pm

Little news from bugzilla:
Miciomax tried to use DIB engine ..
and seems that it shows noticeable speed up..

Can someone help him please!!?!?
http://bugs.winehq.org/show_bug.cgi?id=421

AutoCAD and Wine

mono 2.0

poll

poll

Re: poll

AutoCAD and Wine

AutoCAD and Wine

AutoCAD and Wine

cannot run autocad in 1.1.8-10.5.5

clean wineprefix

AutoCAD and Wine