DVDFab not working anymore
-
- Level 1
- Posts: 7
- Joined: Sat Oct 23, 2010 6:53 am
DVDFab not working anymore
I used DVDFab-8.0.2.2 with wine and ubuntu 10.04 for quite some time and everything worked pretty well. After doing a fresh install of ubuntu 10.10 DVDFab didn't recognize my BD-ROM drive anymore.
In Ubuntu 10.04 I had to wait until the linux autorun had finished and then DVDFab started to check the disc. With Ubuntu 10.10 the linux autorun finishes but DVDFab does nothing.
I also upgraded to wine-1.3.5. But still the same result.
Did I miss anything ? Do I have to configure wine so that it recognizes my BD-ROM ?
In Ubuntu 10.04 I had to wait until the linux autorun had finished and then DVDFab started to check the disc. With Ubuntu 10.10 the linux autorun finishes but DVDFab does nothing.
I also upgraded to wine-1.3.5. But still the same result.
Did I miss anything ? Do I have to configure wine so that it recognizes my BD-ROM ?
Re: DVDFab not working anymore
Is it mapped as a drive in winecfg?rumpumpel1 wrote: Did I miss anything ? Do I have to configure wine so that it recognizes my BD-ROM ?
-
- Level 1
- Posts: 7
- Joined: Sat Oct 23, 2010 6:53 am
Re: DVDFab not working anymore
I configured manually in dosdevices the following entry: d: -> /dev/sr0dimesio wrote:Is it mapped as a drive in winecfg?rumpumpel1 wrote: Did I miss anything ? Do I have to configure wine so that it recognizes my BD-ROM ?
but it didn't help.
-
- Level 1
- Posts: 7
- Joined: Sat Oct 23, 2010 6:53 am
Re: DVDFab not working anymore
Wrong, d: have to point to a mount directory. d:: should point to the device.rumpumpel1 wrote:I configured manually in dosdevices the following entry: d: -> /dev/sr0
but it didn't help.
That's why you should use winecfg.
rumpumpel1 wrote:It's not really nice because for every disc I have to change the link but it works.[/quot]
That means you HAL (dbus) is not working properly or you haven't installed it's 32-bit libraries for Wine to use.
-
- Level 1
- Posts: 7
- Joined: Sat Oct 23, 2010 6:53 am
-
- Level 1
- Posts: 7
- Joined: Sat Oct 23, 2010 6:53 am
Run this and check that Wine successfully communicates with HAL:rumpumpel1 wrote:in winecfg the drive has the type CD-ROM.
Code: Select all
WINEDEBUG=+mountmgr wine notepad
-
- Level 1
- Posts: 7
- Joined: Sat Oct 23, 2010 6:53 am
this is the output of the command:
trace:mountmgr:DriverEntry L"\\Registry\\Machine\\System\\CurrentControlSet\\Services\\MountMgr"
trace:mountmgr:create_disk_device created device L"\\Device\\Harddisk0"
trace:mountmgr:create_disk_device created device L"\\Device\\HarddiskVolume1"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000043}" id (null) for L"\\Device\\HarddiskVolume1"
trace:mountmgr:add_mount_point created L"\\DosDevices\\C:" id (null) for L"\\Device\\HarddiskVolume1"
trace:mountmgr:create_disk_device created device L"\\Device\\CdRom0"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000044}" id (null) for L"\\Device\\CdRom0"
trace:mountmgr:add_mount_point created L"\\DosDevices\\D:" id (null) for L"\\Device\\CdRom0"
trace:mountmgr:create_disk_device created device L"\\Device\\HarddiskVolume2"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000045}" id (null) for L"\\Device\\HarddiskVolume2"
trace:mountmgr:add_mount_point created L"\\DosDevices\\E:" id (null) for L"\\Device\\HarddiskVolume2"
trace:mountmgr:create_disk_device created device L"\\Device\\Harddisk1"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000046}" id (null) for L"\\Device\\Harddisk1"
trace:mountmgr:add_mount_point created L"\\DosDevices\\F:" id (null) for L"\\Device\\Harddisk1"
trace:mountmgr:create_disk_device created device L"\\Device\\Harddisk2"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000047}" id (null) for L"\\Device\\Harddisk2"
trace:mountmgr:add_mount_point created L"\\DosDevices\\G:" id (null) for L"\\Device\\Harddisk2"
trace:mountmgr:create_disk_device created device L"\\Device\\HarddiskVolume3"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000048}" id (null) for L"\\Device\\HarddiskVolume3"
trace:mountmgr:add_mount_point created L"\\DosDevices\\H:" id (null) for L"\\Device\\HarddiskVolume3"
trace:mountmgr:create_disk_device created device L"\\Device\\HarddiskVolume4"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000049}" id (null) for L"\\Device\\HarddiskVolume4"
trace:mountmgr:add_mount_point created L"\\DosDevices\\I:" id (null) for L"\\Device\\HarddiskVolume4"
trace:mountmgr:initialize_diskarbitration Skipping, Disk Arbitration support not compiled in
how do I know, if it successfully communicates with HAL ?
trace:mountmgr:DriverEntry L"\\Registry\\Machine\\System\\CurrentControlSet\\Services\\MountMgr"
trace:mountmgr:create_disk_device created device L"\\Device\\Harddisk0"
trace:mountmgr:create_disk_device created device L"\\Device\\HarddiskVolume1"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000043}" id (null) for L"\\Device\\HarddiskVolume1"
trace:mountmgr:add_mount_point created L"\\DosDevices\\C:" id (null) for L"\\Device\\HarddiskVolume1"
trace:mountmgr:create_disk_device created device L"\\Device\\CdRom0"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000044}" id (null) for L"\\Device\\CdRom0"
trace:mountmgr:add_mount_point created L"\\DosDevices\\D:" id (null) for L"\\Device\\CdRom0"
trace:mountmgr:create_disk_device created device L"\\Device\\HarddiskVolume2"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000045}" id (null) for L"\\Device\\HarddiskVolume2"
trace:mountmgr:add_mount_point created L"\\DosDevices\\E:" id (null) for L"\\Device\\HarddiskVolume2"
trace:mountmgr:create_disk_device created device L"\\Device\\Harddisk1"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000046}" id (null) for L"\\Device\\Harddisk1"
trace:mountmgr:add_mount_point created L"\\DosDevices\\F:" id (null) for L"\\Device\\Harddisk1"
trace:mountmgr:create_disk_device created device L"\\Device\\Harddisk2"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000047}" id (null) for L"\\Device\\Harddisk2"
trace:mountmgr:add_mount_point created L"\\DosDevices\\G:" id (null) for L"\\Device\\Harddisk2"
trace:mountmgr:create_disk_device created device L"\\Device\\HarddiskVolume3"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000048}" id (null) for L"\\Device\\HarddiskVolume3"
trace:mountmgr:add_mount_point created L"\\DosDevices\\H:" id (null) for L"\\Device\\HarddiskVolume3"
trace:mountmgr:create_disk_device created device L"\\Device\\HarddiskVolume4"
trace:mountmgr:add_mount_point created L"\\??\\Volume{00000000-0000-0000-0000-000000000049}" id (null) for L"\\Device\\HarddiskVolume4"
trace:mountmgr:add_mount_point created L"\\DosDevices\\I:" id (null) for L"\\Device\\HarddiskVolume4"
trace:mountmgr:initialize_diskarbitration Skipping, Disk Arbitration support not compiled in
how do I know, if it successfully communicates with HAL ?
-
- Level 1
- Posts: 7
- Joined: Sat Oct 23, 2010 6:53 am