cannot access winecfg/Drive with .wine made with 1.1.18

mr jingle · Post by **mr jingle** » Mon Mar 30, 2009 4:52 pm

I'm using wine 1.1.18 on Ubuntu Intrepid 32 bit and cannot access the "Drive" folder in
winecfg while using ".wine" folder created with this release.
while creating it, the terminal shows the error:

err:process:__wine_kernel_init boot event wait timed out

and when accessing the Drive Tab it says:

err:winecfg:open_mountmgr failed to open mount manager err 2

after i close winecfg the processes "wineserver" and "services.exe" remain active.

If I try to use an older folder , converted to 1.1.18 but created with wine 1.1.17 , it works without any of these problems.

I've tried removing every trace of pulseaudio from my computer, using pasuspender, aoss, etc and nothing seems to change.

John Drescher · Post by **John Drescher** » Mon Mar 30, 2009 5:06 pm

On Mon, Mar 30, 2009 at 5:52 PM, mr jingle <[email protected]> wrote:

I'm using wine 1.1.18 on Ubuntu Intrepid 32 bit and cannot access the "Drive" folder in
winecfg while using ".wine" folder created with this release.
while creating it, the terminal shows the error:

err:process:__wine_kernel_init boot event wait timed out

and when accessing the Drive Tab it says:

err:winecfg:open_mountmgr failed to open mount manager err 2

after i close winecfg the processes "wineserver" and "services.exe" remain active.

If I try to use an older folder , converted to 1.1.18 but created with wine 1.1.17 , it works without any of these problems.

I've tried removing every trace of pulseaudio from my computer, using pasuspender, aoss, etc and nothing seems to change.

Did you run wine as root, or execute su or sudo?

John

mr jingle · Post by **mr jingle** » Tue Mar 31, 2009 5:41 am

none of them. I run it as non-privileged user.

vitamin · Post by **vitamin** » Tue Mar 31, 2009 11:17 am

mr jingle wrote:none of them. I run it as non-privileged user.

Reinstall video drivers. Make sure you completely removed pulseaudio.

mr jingle · Post by **mr jingle** » Tue Mar 31, 2009 12:05 pm

Done both of them, but no dice.

And regarding pulseaudio, I tested removing everything that was related in some way to it.

Actually, I copied the system.reg and user.reg from the working wineprefix to a newly created and, voilà, it starts working. Even while pulseaudio is installed.
I've not yet identified exactly what makes it to work, unfortunately. Is there any privacy consideration i should consider before i upload these files on pastebin?

And before doing any test, I've double checked with "ps aux" if any wine processes or subprocesses were running. And if I remove the .wine folder, start winecfg, wait until it appears (again, showing the error __wine_kernel_init boot event wait timed out while creating the .wine folder), then close it, i get from ps aux:

Code: Select all

8143  0.0  0.0   3728   908 ?        Ss   18:54   0:00 /usr/bin/../lib/../bin/wineserver
8145  0.1  0.4 2652432 7416 ?        Ss   18:54   0:00 C:\windows\system32\wineboot.exe --init
8146  0.0  0.1 2642500 2504 ?        Sl   18:54   0:00 C:\windows\system32\services.exe
8175  0.1  0.3 2648212 5848 ?        Ss   18:54   0:00 C:\windows\system32\explorer.exe /desktop

And I have to kill them.

(I've taken out my username for privacy reasons)

mr jingle · Post by **mr jingle** » Tue Mar 31, 2009 12:34 pm

Ok, Big update.

If I don't kill the aforementioned processes and wait for something like 10 minutes, the console spouts the following:

Code: Select all

fixme:dwmapi:DwmIsCompositionEnabled 0x33cf94
fixme:file:MoveFileWithProgressW MOVEFILE_WRITE_THROUGH unimplemented
fixme:advapi:SetNamedSecurityInfoW L"C:\\windows\\gecko\\0.9.1\\wine_gecko\\components\\xpti.dat" 1 536870916 (nil) (nil) 0x33c960 (nil)
fixme:iphlpapi:NotifyAddrChange (Handle 0x60ae898, overlapped 0x60ae8a0): stub
fixme:file:MoveFileWithProgressW MOVEFILE_WRITE_THROUGH unimplemented
fixme:advapi:SetNamedSecurityInfoW L"C:\\windows\\gecko\\0.9.1\\wine_gecko\\components\\compreg.dat" 1 536870916 (nil) (nil) 0x33ca50 (nil)
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\plds4.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\js3250.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\nss3.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\softokn3.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\nspr4.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\plugins\npnul32.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\xul.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\xpcom.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\nssutil3.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\nssckbi.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\freebl3.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\nssdbm3.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\smime3.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\ssl3.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\plc4.dll") - Symbol NSGetModule not found
0[198a40]: nsNativeModuleLoader::LoadModule("C:\windows\gecko\0.9.1\wine_gecko\sqlite3.dll") - Symbol NSGetModule not found
fixme:shell:DllCanUnloadNow stub
wine: configuration in '/home/xxx/.wine' has been updated.

and then it starts working correctly.

James McKenzie · Post by **James McKenzie** » Tue Mar 31, 2009 9:41 pm

mr jingle wrote:

Ok, Big update.

If I don't kill the aforementioned processes and wait for something like 10 minutes, the console spouts the following:

Looks like you have no internet connection, thus wine-gecko is not being
updated.

James McKenzie

mr jingle · Post by **mr jingle** » Wed Apr 01, 2009 6:54 am

uh?

*check forum.winehq.org*

Uhmm, well, I think this machine is connected to the internet

Anyway, the output of "apt-cache showpkg wine-gecko" is the following:

Code: Select all

Package: wine-gecko
Versions: 
0.9.1-0ubuntu1 (/var/lib/apt/lists/wine.budgetdedicated.com_apt_dists_intrepid_main_binary-i386_Packages) (/var/lib/dpkg/status)
 Description Language: 
                 File: /var/lib/apt/lists/wine.budgetdedicated.com_apt_dists_intrepid_main_binary-i386_Packages
                  MD5: 46be1ba96a5e9cde71a8f520aef8e1e9

0.1.0-0ubuntu1 (/var/lib/apt/lists/it.archive.ubuntu.com_ubuntu_dists_intrepid_multiverse_binary-i386_Packages)
 Description Language: 
                 File: /var/lib/apt/lists/it.archive.ubuntu.com_ubuntu_dists_intrepid_multiverse_binary-i386_Packages
                  MD5: 46be1ba96a5e9cde71a8f520aef8e1e9


Reverse Depends: 
  wine,wine-gecko
  wine,wine-gecko
Dependencies: 
0.9.1-0ubuntu1 - dpkg (2 1.14.12ubuntu3) wine (0 (null)) 
0.1.0-0ubuntu1 - dpkg (2 1.14.12ubuntu3) wine (0 (null)) 
Provides: 
0.9.1-0ubuntu1 - 
0.1.0-0ubuntu1 - 
Reverse Provides:

which is basically the latest update from the winehq repository.

And the updater shows nothing regarding wine nor wine-gecko.