Can't install an application
Can't install an application
Good evening everybody.
Some time ago I installed a Hot Wire Foam Cutter application called FCNX that you can download here : https://cncfab.renaudiltis.com/telechargements.html on an old laptop running Linux Mint 20.3 and Wine 5. I have been able to install it directly very easily and make it run without any problem.
I desperately try to install this application on another machine (Intel Nuc7i5BNH) running Linux Mint 21.
I used the software manager which installed Wine 6.0.3 repack1. The application never launched, no warning window showed up. I removed this Wine version.
I used the synaptic packet manager and installed wine-desktop-files (5.0.3), wine-installer (5.0.3), q4wine (1.3.12-1), as adviced on the software manager by Susan707. But the application never launched . I removed all.
For any version of Wine I installed, I can open the .exe with Wine, the application installer launches and does it's work, a link is placed on the desktop, but when I try to launch FCNX, the turning wheel shows for 5-7 seconds then disappear.
I removed all Wine files (well in fact as I am a newby, I don't really know if I removed everything).
I really need this application on this machine and I don't know what to do to install it.
More than that : I'm really worried that this application runs on another machine.
Please help.
Regards from France
Thierry
Some time ago I installed a Hot Wire Foam Cutter application called FCNX that you can download here : https://cncfab.renaudiltis.com/telechargements.html on an old laptop running Linux Mint 20.3 and Wine 5. I have been able to install it directly very easily and make it run without any problem.
I desperately try to install this application on another machine (Intel Nuc7i5BNH) running Linux Mint 21.
I used the software manager which installed Wine 6.0.3 repack1. The application never launched, no warning window showed up. I removed this Wine version.
I used the synaptic packet manager and installed wine-desktop-files (5.0.3), wine-installer (5.0.3), q4wine (1.3.12-1), as adviced on the software manager by Susan707. But the application never launched . I removed all.
For any version of Wine I installed, I can open the .exe with Wine, the application installer launches and does it's work, a link is placed on the desktop, but when I try to launch FCNX, the turning wheel shows for 5-7 seconds then disappear.
I removed all Wine files (well in fact as I am a newby, I don't really know if I removed everything).
I really need this application on this machine and I don't know what to do to install it.
More than that : I'm really worried that this application runs on another machine.
Please help.
Regards from France
Thierry
Re: Can't install an application
When you stated that the result is the same "[f]or any version of Wine [you] installed", might that also include the most recent stable release of 7.0 or perhaps the developer build subsequent thereto? The instructions for installing those builds can be found in the wiki: https://wiki.winehq.org/Ubuntu
Re: Can't install an application
I think I already followed this procedure, but I do again.
STEP 1
STEP2
STEP3
As you can see I did not want to enable the i386 architecture. I enabled it later when I saw at the 3rd step that 2 packages had not been upgraded.
I thought that I could upgrade directly without listing the packages, so I did "sudo apt upgrade" before listing.
When I noticed something was wrong with the upgrade, I listed the packages and enabled the i386 architecture. Why should I enable this architecture as the FCNX application is a 64 bits application ? Anyway it's done.
As I do not know how to upgrade these packages I stopped the procedure and I'm waiting for your "green light" to go on and how to go on.
Thierry
STEP 1
Code: Select all
thierry@thierry-NUC7i5BNH:~$ sudo wget -nc -O /usr/share/keyrings/winehq-archive.key https://dl.winehq.org/wine-builds/winehq.key
[sudo] Mot de passe de thierry :
--2022-09-11 17:17:49-- https://dl.winehq.org/wine-builds/winehq.key
Résolution de dl.winehq.org (dl.winehq.org)… 151.101.122.217
Connexion à dl.winehq.org (dl.winehq.org)|151.101.122.217|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 3220 (3,1K) [application/pgp-keys]
Enregistre : ‘/usr/share/keyrings/winehq-archive.key’
/usr/share/keyrings 100%[===================>] 3,14K --.-KB/s ds 0,002s
2022-09-11 17:17:50 (1,84 MB/s) - ‘/usr/share/keyrings/winehq-archive.key’ enregistré [3220/3220]
STEP2
Code: Select all
thierry@thierry-NUC7i5BNH:~$ sudo wget -NP /etc/apt/sources.list.d/ https://dl.winehq.org/wine-builds/ubuntu/dists/jammy/winehq-jammy.sources
--2022-09-11 17:21:19-- https://dl.winehq.org/wine-builds/ubuntu/dists/jammy/winehq-jammy.sources
Résolution de dl.winehq.org (dl.winehq.org)… 151.101.122.217
Connexion à dl.winehq.org (dl.winehq.org)|151.101.122.217|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 165
Enregistre : ‘/etc/apt/sources.list.d/winehq-jammy.sources’
winehq-jammy.source 100%[===================>] 165 --.-KB/s ds 0s
2022-09-11 17:21:19 (2,53 MB/s) - ‘/etc/apt/sources.list.d/winehq-jammy.sources’ enregistré [165/165]
Code: Select all
thierry@thierry-NUC7i5BNH:~$ sudo apt update
Atteint :1 http://ubuntu.univ-reims.fr/ubuntu jammy InRelease
Réception de :2 http://ubuntu.univ-reims.fr/ubuntu jammy-updates InRelease [114 kB]
Ign :3 http://mirror6.layerjet.com/linuxmint/packages vanessa InRelease
Réception de :4 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Atteint :5 http://mirror6.layerjet.com/linuxmint/packages vanessa Release
Réception de :6 http://ubuntu.univ-reims.fr/ubuntu jammy-backports InRelease [99,8 kB]
Réception de :8 https://dl.winehq.org/wine-builds/ubuntu jammy InRelease [8 041 B]
Réception de :9 http://ubuntu.univ-reims.fr/ubuntu jammy-updates/main amd64 DEP-11 Metadata [91,5 kB]
Réception de :10 http://ubuntu.univ-reims.fr/ubuntu jammy-updates/universe amd64 DEP-11 Metadata [237 kB]
Réception de :11 http://ubuntu.univ-reims.fr/ubuntu jammy-updates/multiverse amd64 DEP-11 Metadata [940 B]
Réception de :12 http://security.ubuntu.com/ubuntu jammy-security/main amd64 DEP-11 Metadata [11,4 kB]
Réception de :13 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 DEP-11 Metadata [10,4 kB]
Réception de :14 http://ubuntu.univ-reims.fr/ubuntu jammy-backports/universe amd64 DEP-11 Metadata [12,3 kB]
Réception de :15 https://dl.winehq.org/wine-builds/ubuntu jammy/main all Packages [928 B]
Réception de :16 https://dl.winehq.org/wine-builds/ubuntu jammy/main amd64 Packages [45,5 kB]
Réception de :17 https://dl.winehq.org/wine-builds/ubuntu jammy/main i386 Packages [45,4 kB]
787 ko réceptionnés en 1s (1 192 ko/s)
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait
2 paquets peuvent être mis à jour. Exécutez « apt list --upgradable » pour les voir.
STEP 3.1
thierry@thierry-NUC7i5BNH:~$ sudo apt upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants ont été conservés :
libvkd3d1 libvkd3d1:i386
0 mis à jour, 0 nouvellement installés, 0 à enlever et 2 non mis à jour.
STEP 3.2
thierry@thierry-NUC7i5BNH:~$ apt list --upgradable
En train de lister... Fait
libvkd3d1/jammy 1.3~jammy-1 amd64 [pouvant être mis à jour depuis : 1.1-5]
libvkd3d1/jammy 1.3~jammy-1 i386 [pouvant être mis à jour depuis : 1.1-5]
I thought that I could upgrade directly without listing the packages, so I did "sudo apt upgrade" before listing.
When I noticed something was wrong with the upgrade, I listed the packages and enabled the i386 architecture. Why should I enable this architecture as the FCNX application is a 64 bits application ? Anyway it's done.
As I do not know how to upgrade these packages I stopped the procedure and I'm waiting for your "green light" to go on and how to go on.
Thierry
Re: Can't install an application
Finally the update manager proposed to upgrade the 2 missing packages.
Then I jumped to STEP 4 : installing a stable version of Wine which failed :
I'm not sure to install a development version of Wine so I stoped here.
Thierry
Then I jumped to STEP 4 : installing a stable version of Wine which failed :
Code: Select all
thierry@thierry-NUC7i5BNH:~$ sudo apt install --install-recommends winehq-stable
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet winehq-stable
Thierry
Re: Can't install an application
I finally installed Wine-6.0.3 (Ubuntu 6.0.3~repack-1), using the synaptics packages manager (sorry for the translation, I hope you understand what I mean).
I installed FCNX application using Wine installer/uninstaller, because when I try to install it with "Open/ Another application", Wine doesn't appear in the list of the applications.
The installation went on correctly till the end.
But FCNX doesn't launch : the hypnotic wheel spins for a few seconds then disappear.
Is there a way to inspect the system while I try to launch the application ?
I decided to try with another application "Tracfoil" https://tracfoil.com/tracfoil/fr/telechargement.html.
I tried to install it the same way as above (Wine installer/uninstaller) : Wine does not recognize the .exe file.
That's driving me mad
Thierry
I installed FCNX application using Wine installer/uninstaller, because when I try to install it with "Open/ Another application", Wine doesn't appear in the list of the applications.
The installation went on correctly till the end.
But FCNX doesn't launch : the hypnotic wheel spins for a few seconds then disappear.
Is there a way to inspect the system while I try to launch the application ?
I decided to try with another application "Tracfoil" https://tracfoil.com/tracfoil/fr/telechargement.html.
I tried to install it the same way as above (Wine installer/uninstaller) : Wine does not recognize the .exe file.
That's driving me mad
Thierry
Re: Can't install an application
I think it is a 32-bit program.Why should I enable this architecture as the FCNX application is a 64 bits application ?
Code: Select all
file Setup_FilChaudNX_v563.exe
Setup_FilChaudNX_v563.exe: PE32 executable (GUI) Intel 80386, for MS Windows
# And after the installation
file FilChaudNX.exe
FilChaudNX.exe: PE32 executable (GUI) Intel 80386, for MS Windows
You can install the runtime with winetricks
Code: Select all
winetricks vb6run
Re: Can't install an application
I enabled the i386 architecture.
I have already copied the vb6run.dll in the System32 and the Syswow64 directories of .wine\c:\windows as recommended by on the FCNX site.
Without any success.
Thierry
I have already copied the vb6run.dll in the System32 and the Syswow64 directories of .wine\c:\windows as recommended by on the FCNX site.
Without any success.
Thierry
Re: Can't install an application
Could you post a terminal output?
Re: Can't install an application
I installed the VB6RUN.DLLwith Winetricks.
And FCNX launches !
Thank you very much for your help your kindness and your patience.
Regards from France
Thierry
PS : last thing : when I launch FCNX from a terminal opend in the FCNX directory I have this warning :
And FCNX launches !
Thank you very much for your help your kindness and your patience.
Regards from France
Thierry
PS : last thing : when I launch FCNX from a terminal opend in the FCNX directory I have this warning :
Code: Select all
thierry@thierry-NUC7i5BNH:~/.wine/drive_c/Program Files (x86)/FilChaudNX$ wine FilChaudNX.exe
MESA-INTEL: warning: Performance support disabled, consider sysctl dev.i915.perf_stream_paranoid=0
0024:err:winediag:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path. Usually, you can find it in the winbind package of your distribution.
Re: Can't install an application
If the program works normally, then the error message about ntlm_auth can be ignored.
Should the program fail to login or authenticate somewhere, install the winbind package.
Should the program fail to login or authenticate somewhere, install the winbind package.
Re: Can't install an application
The program works, so I'll leave it like that.
Thank you so much for your help.
Regards
Tgierry
Thank you so much for your help.
Regards
Tgierry