I'm using Wine 7.15 on Ubuntu 22.04.1 (Jammy Jellyfish), installed via the WineHQ repositories. Here's the dmesg out that comes from connecting the POP3 scanner to the USB port:
Code: Select all
[ 618.602737] usb 1-2: new high-speed USB device number 7 using xhci_hcd
[ 618.753276] usb 1-2: New USB device found, idVendor=2207, idProduct=110c, bcdDevice= 4.19
[ 618.753290] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 618.753297] usb 1-2: Product: ZXProduct
[ 618.753303] usb 1-2: Manufacturer: Chishine3d
[ 618.753307] usb 1-2: SerialNumber: A21A8297206F00A54
[ 618.761512] usb 1-2: Found UVC 1.00 device ZXProduct (2207:110c)
[ 618.767836] input: ZXProduct: DepthCamA21A8297206F as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input21
[ 618.768846] usb 1-2: Found UVC 1.00 device ZXProduct (2207:110c)
[ 618.774037] input: ZXProduct: RGBCamA21A8297206F00 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/input/input22
[ 618.776047] hid-generic 0003:2207:110C.0002: hiddev0,hidraw1: USB HID v1.01 Device [Chishine3d ZXProduct] on usb-0000:00:14.0-2/input4
Is there anything I could try to get Revo Scan to connect via USB?