How to install wine-gecko in /usr/share/wine/gecko
How to install wine-gecko in /usr/share/wine/gecko
Hi,
here you state, gecko should be installed in /usr/share/wine/gecko to avoid to install gecko in every WINEPREFIX.
On my system there is no path /usr/share/wine, but there is /opt/wine-stable.
How to do this in correct way?
I'm using winehq-stable 5.0.0 in Ubuntu 18.04.
here you state, gecko should be installed in /usr/share/wine/gecko to avoid to install gecko in every WINEPREFIX.
On my system there is no path /usr/share/wine, but there is /opt/wine-stable.
How to do this in correct way?
I'm using winehq-stable 5.0.0 in Ubuntu 18.04.
Re: How to install wine-gecko in /usr/share/wine/gecko
/opt/wine/gecko
Re: How to install wine-gecko in /usr/share/wine/gecko
Hm, what you want to say me?
This folder does not exist, but /opt/wine-stable
Also I find:
Code: Select all
ich@T500:~$ ls -l .wine/drive_c/windows/system32/gecko/
insgesamt 28
drwxrwxr-x 3 ich ich 4096 Jun 15 2013 1.4
drwxrwxr-x 3 ich ich 4096 Mai 26 2014 2.21
drwxrwxr-x 3 ich ich 4096 Aug 14 2015 2.36
drwxrwxr-x 3 ich ich 4096 Sep 1 2015 2.40
drwxrwxr-x 3 ich ich 4096 Apr 24 2017 2.47
drwxr-xr-x 3 ich ich 4096 Feb 14 16:42 2.47.1
drwxrwxr-x 2 ich ich 4096 Jun 15 2013 plugin
ich@T500:~$ ls -l .wine/drive_c/windows/syswow64/gecko/
insgesamt 24
drwxrwxr-x 3 ich ich 4096 Jun 15 2013 1.4
drwxrwxr-x 3 ich ich 4096 Mai 26 2014 2.21
drwxrwxr-x 3 ich ich 4096 Aug 14 2015 2.36
drwxrwxr-x 3 ich ich 4096 Sep 1 2015 2.40
drwxrwxr-x 3 ich ich 4096 Apr 24 2017 2.47
drwxrwxr-x 2 ich ich 4096 Jun 15 2013 plugin
ich@T500:~$ ls -l .wine32/drive_c/windows/system32/gecko/
insgesamt 16
drwxrwxr-x 3 ich ich 4096 Aug 16 2015 2.36
drwxrwxr-x 3 ich ich 4096 Sep 17 2015 2.40
drwxrwxr-x 3 ich ich 4096 Apr 24 2017 2.47
drwxrwxr-x 2 ich ich 4096 Aug 16 2015 plugin
Re: How to install wine-gecko in /usr/share/wine/gecko
You have to create the folder.
Re: How to install wine-gecko in /usr/share/wine/gecko
As dimesio says you create the folders
Then extract into the location, here ld what I have for example;
You can also doe the same for mono;
Then extract into the location, here ld what I have for example;
Code: Select all
/opt/wine/gecko/wine-gecko-2.47.1-x86/
/opt/wine/gecko/wine-gecko-2.47.1-x86_64/
Code: Select all
/opt/wine/mono/wine-mono-4.9.4/
Re: How to install wine-gecko in /usr/share/wine/gecko
OK, now I understand, I should extract the tar balls into those directories and then I can delete:
Right?
But what's about? :
Why aren't those packages in the repository https://dl.winehq.org/wine-builds/ubuntu ?
It would be convenient to install them from there with:
Code: Select all
~..wine/drive_c/windows/system32/gecko
~..wine/drive_c/windows/syswow64/gecko
~..wine32/drive_c/windows/system32/gecko
~..wine/drive_c/windows/mono
~..wine32/drive_c/windows/mono
But what's about? :
Code: Select all
**/gecko//plugin
It would be convenient to install them from there with:
Code: Select all
sudo apt install wine-gecko
sudo apt install wine-mono
-
- Newbie
- Posts: 1
- Joined: Fri Feb 21, 2020 12:36 pm
Re: How to install wine-gecko in /usr/share/wine/gecko
i'm in the same situation as the original poster.
I have VERY limited experience with working from the command line/terminal, so if someone could give me the exact code I need to run to create that directory under Ubuntu 18.04, I would greatly appreciate it.
I thought maybe I could just create the /wine/gecko folders under /opt with right clicking and then clicking 'new folder' but my file manager has that option grayed out here.
thanks!
I have VERY limited experience with working from the command line/terminal, so if someone could give me the exact code I need to run to create that directory under Ubuntu 18.04, I would greatly appreciate it.
I thought maybe I could just create the /wine/gecko folders under /opt with right clicking and then clicking 'new folder' but my file manager has that option grayed out here.
thanks!
Re: How to install wine-gecko in /usr/share/wine/gecko
Here are the commands (give it a try):
https://wiki.ubuntuusers.de/Wine/#NET-u ... rweiterung
This must be done before the first run of Wine, otherwise first delete ~/.wine.
Alternatively you could start your file manager with:
Don't miss the `-H`, otherwise you corrupt your nautilus normal settings.
https://wiki.ubuntuusers.de/Wine/#NET-u ... rweiterung
This must be done before the first run of Wine, otherwise first delete ~/.wine.
Alternatively you could start your file manager with:
Code: Select all
sudo -H nautilus /opt ## this starts nautilus with root privileges
Re: How to install wine-gecko in /usr/share/wine/gecko
Hi again dimesio,
may be you would like to add following commands to https://wiki.winehq.org/Gecko and https://wiki.winehq.org/Mono for convenience:
may be you would like to add following commands to https://wiki.winehq.org/Gecko and https://wiki.winehq.org/Mono for convenience:
Code: Select all
cd /opt/wine-stable/share/wine/
sudo mkdir -p gecko mono
wget -O - http://dl.winehq.org/wine/wine-gecko/2.47.1/wine-gecko-2.47.1-x86.tar.bz2 | sudo tar jxf - -C gecko
wget -O - http://dl.winehq.org/wine/wine-gecko/2.47.1/wine-gecko-2.47.1-x86_64.tar.bz2 | sudo tar jxf - -C gecko
wget -O - http://dl.winehq.org/wine/wine-mono/5.0.0/wine-mono-5.0.0-x86.tar.xz | sudo tar Jxf - -C mono
wget -O - http://dl.winehq.org/wine/wine-mono/5.1.0/wine-mono-5.1.0-x86.tar.xz | sudo tar Jxf - -C mono
Re: How to install wine-gecko in /usr/share/wine/gecko
https://wiki.winehq.org/Mono#Shared_Install
The documentation even explains it’s possible to use /opt/wine/(gecko/mono)
I do this myself to save disk space with all the prefixes I have setup for different games using different wine versions (crossover-wine patched to use the shared wine-gecko)
This also applies for wine-gecko even though it’s not listed on the winehq section
Re: How to install wine-gecko in /usr/share/wine/gecko
If I installed the binaries there, starting a wine program, I was still prompted to download mono which then was installed in the wineprefix. Same problem with /usr/share/wine/mono .Gcenx wrote: ↑Sun Jun 21, 2020 6:32 pm https://wiki.winehq.org/Mono#Shared_Install
The documentation even explains it’s possible to use /opt/wine/(gecko/mono)
I do this myself to save disk space with all the prefixes I have setup for different games using different wine versions (crossover-wine patched to use the shared wine-gecko)
I'm on Ubuntu. Maybe it's different on an other Linux distribution.
Another solution is to additionally do:
sudo ln -s /opt/wine/mono /opt/wine/gecko /opt/wine-stable/share/wine/
Re: How to install wine-gecko in /usr/share/wine/gecko
It sounds like your grabbing the .msi filesUlfZibis wrote: ↑Sun Jun 21, 2020 6:59 pmIf I installed the binaries there, starting a wine program, I was still prompted to download mono which then was installed in the wineprefix. Same problem with /usr/share/wine/mono .Gcenx wrote: ↑Sun Jun 21, 2020 6:32 pm https://wiki.winehq.org/Mono#Shared_Install
The documentation even explains it’s possible to use /opt/wine/(gecko/mono)
I do this myself to save disk space with all the prefixes I have setup for different games using different wine versions (crossover-wine patched to use the shared wine-gecko)
I'm on Ubuntu. Maybe it's different on an other Linux distribution.
Another solution is to additionally do:
sudo ln -s /opt/wine/mono /opt/wine/gecko /opt/wine-stable/share/wine/
Re: How to install wine-gecko in /usr/share/wine/gecko
I currently have the following;
/opt/wine/mono/wine-mono-4.9.4 < Wine-Stable-5.0>5.6
/opt/wine/mono/wine-mono-5.0.0 < Wine-Devel-5.7>5.10
/opt/wine/mono/wine-mono-5.1.0 < Wine-Devel-5.11
/opt/wine/gecko/wine-gecko-2.47.1-x86
/opt/wine/gecko/wine-gecko-2.47.1-x86_64
All of the above are detected without issue and not just on Linux but also on macOS
Re: How to install wine-gecko in /usr/share/wine/gecko
Hi again,
I now checked again. On Ubuntu 20.04 WineHQ 5.0.1 is working fine with /opt/wine/mono/wine-mono-5.0.0, without symlinks to /opt/wine-stable/share/wine/mono.
Yesterday, when checking this out, I was on a machine with Ubuntu 16.04. On this machine, this failed. so I did some try and error and in the end it worked with mono-4.9.4 in /opt/wine-stable/share/wine/mono. Now I also tried /opt/wine/mono/wine-mono-4.9.4 and ... it works too there.
So i can see, that I only stumbled over the wrong version of mono. Result:
WineHQ 5.0.1 on Ubuntu 20.04 works with /opt/wine/mono/wine-mono-5.0.0
WineHQ 5.0.1 on Ubuntu 16.04 works with /opt/wine/mono/wine-mono-4.9.4
Thank you for insisting so hard, I can agree to your statement.
OT: Is it possible to run Wine-Stable-5.0 and Wine-Devel-5.11 side by side on the same system. What you then get with? : wine --version
I now checked again. On Ubuntu 20.04 WineHQ 5.0.1 is working fine with /opt/wine/mono/wine-mono-5.0.0, without symlinks to /opt/wine-stable/share/wine/mono.
Yesterday, when checking this out, I was on a machine with Ubuntu 16.04. On this machine, this failed. so I did some try and error and in the end it worked with mono-4.9.4 in /opt/wine-stable/share/wine/mono. Now I also tried /opt/wine/mono/wine-mono-4.9.4 and ... it works too there.
So i can see, that I only stumbled over the wrong version of mono. Result:
WineHQ 5.0.1 on Ubuntu 20.04 works with /opt/wine/mono/wine-mono-5.0.0
WineHQ 5.0.1 on Ubuntu 16.04 works with /opt/wine/mono/wine-mono-4.9.4
Thank you for insisting so hard, I can agree to your statement.
OT: Is it possible to run Wine-Stable-5.0 and Wine-Devel-5.11 side by side on the same system. What you then get with? : wine --version
Re: How to install wine-gecko in /usr/share/wine/gecko
You can install both wine-stable and wine-devel packages at once, yes. (As well as wine-staging.)
Each will install to a separate directory under /opt/. If you want you can install one of the winehq-* packages which will make that the default by placing links in /usr/bin/. For example after installing winehq-stable running just 'wine' in a terminal will run stable, but you can still run devel by specifying the full path '/opt/wine-devel/bin/wine'.
Hopefully that was clear. (Also I thought this was in the faq or somewhere but I can't seem to find it now?)
Re: How to install wine-gecko in /usr/share/wine/gecko
As spoon0042 said it’s possible.
I don’t use Winehq packages, it’s ether one I’ve compiled or I’m using Lutris/Proton
But yes it’s possible to have multiple wine packages installed as long as the package was configured to account for this, or you build from source and configure it in this manner
I don’t use Winehq packages, it’s ether one I’ve compiled or I’m using Lutris/Proton
But yes it’s possible to have multiple wine packages installed as long as the package was configured to account for this, or you build from source and configure it in this manner
Re: How to install wine-gecko in /usr/share/wine/gecko
Hi again,UlfZibis wrote: ↑Mon Jun 22, 2020 7:23 am I now checked again. On Ubuntu 20.04 WineHQ 5.0.1 is working fine with /opt/wine/mono/wine-mono-5.0.0, without symlinks to /opt/wine-stable/share/wine/mono.
Yesterday, when checking this out, I was on a machine with Ubuntu 16.04. On this machine, this failed. so I did some try and error and in the end it worked with mono-4.9.4 in /opt/wine-stable/share/wine/mono. Now I also tried /opt/wine/mono/wine-mono-4.9.4 and ... it works too there.
So i can see, that I only stumbled over the wrong version of mono. Result:
WineHQ 5.0.1 on Ubuntu 20.04 works with /opt/wine/mono/wine-mono-5.0.0
my last statement seems only half right. When I run wineboot, it is satisfied with wine-mono-5.0.0. But when I run a Program e.g. Yellow Leads Extractor it is missing mono:
Code: Select all
:~/.wine32/drive_c/users/ich$ env WINEPREFIX="/home/ich/.wine32" wine C:\\\\windows\\\\command\\\\start.exe /Unix /home/ich/.wine32/drive_c/Program\ Files/Yellow\ Leads\ Extractor/YellowLeadsExtractor.exe
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ERROR: ld.so: object 'libgtk3-nocsd.so.0' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
ich@T500:~/.wine32/drive_c/users/ich$ 002d:fixme:mscoree:parse_supported_runtime sku=L".NETFramework,Version=v4.5" not implemented
002d:fixme:mscoree:parse_supported_runtime sku=L".NETFramework,Version=v4.5" not implemented
002d:err:mscoree:CLRRuntimeInfo_GetRuntimeHost Wine Mono is not installed
Code: Select all
$ wget -O - https://dl.winehq.org/wine/wine-mono/4.9.4/wine-mono-bin-4.9.4.tar.gz | sudo tar -xzf - -C /opt/wine/mono
What is the miracle, while wineboot accepts mono-5.0.0, but not the program?