WineHQ
Wine Forums

Board index » WineHQ » Wine Help » Linux




 Page 1 of 1 [ 1 post ] 



 
Author Message
 Post Posted: Mon Nov 19, 2018 4:20 am 
Offline
Newbie
Newbie

Joined: Mon Nov 19, 2018 4:10 am
Posts: 1
Hello,

I am trying to run the PeakTech DMM Tool with a PeakTech 3430 multimeter. The device is connected to my USB port and maps to /dev/ttyUSB1, which I linked to ~/.wine-dmm/dosdevices/com6. When running the software and trying to connect to COM6, the application fails to read data from it. The followin error message appears:

Code:
0052:fixme:comm:set_queue_size insize 4096 outsize 2048 unimplemented stub


However, when running it with WINEDEBUG="+comm", there are more messages:

Code:
0009:fixme:mscoree:parse_startup useLegacyV2RuntimeActivationPolicy=L"true" not implemented
0009:fixme:gdiplus:resample_bitmap_pixel Unimplemented interpolation 6
0009:trace:comm:GetCommState handle 0x12c, ptr 0x1033968
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_GET_BAUD_RATE (nil) 0 0x32e7bc 4 0x32e744
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_GET_LINE_CONTROL (nil) 0 0x32e7b9 3 0x32e744
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_GET_HANDFLOW (nil) 0 0x32e7cc 16 0x32e744
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_GET_CHARS (nil) 0 0x32e7c6 6 0x32e744
0009:trace:comm:GetCommState OK
0009:trace:comm:dump_dcb bytesize=8 baudrate=38400 fParity=0 Parity=0 stopbits=1
0009:trace:comm:dump_dcb ~IXON ~IXOFF
0009:trace:comm:dump_dcb fOutxCtsFlow=0 fRtsControl=1
0009:trace:comm:dump_dcb fOutxDsrFlow=0 fDtrControl=1
0009:trace:comm:dump_dcb ~CRTSCTS
0009:trace:comm:SetCommState handle 0x12c, ptr 0x1033968
0009:trace:comm:dump_dcb bytesize=8 baudrate=19230 fParity=0 Parity=0 stopbits=1
0009:trace:comm:dump_dcb ~IXON ~IXOFF
0009:trace:comm:dump_dcb fOutxCtsFlow=0 fRtsControl=1
0009:trace:comm:dump_dcb fOutxDsrFlow=0 fDtrControl=1
0009:trace:comm:dump_dcb ~CRTSCTS
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_SET_BAUD_RATE 0x32e7bc 4 (nil) 0 0x32e754
0009:warn:comm:set_baud_rate You (or a program acting at your behest) have specified
a non-standard baud rate 19230.  Wine will set the rate to 19230,
which is as close as we can get by our present understanding of your
hardware. I hope you know what you are doing.  Any disruption Wine
has caused to your linux system can be undone with setserial
(see man setserial). If you have incapacitated a Hayes type modem,
reset it and it will probably recover.
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_SET_LINE_CONTROL 0x32e7b9 3 (nil) 0 0x32e754
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_SET_HANDFLOW 0x32e7cc 16 (nil) 0 0x32e754
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_SET_CHARS 0x32e7c6 6 (nil) 0 0x32e754
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_PURGE 0x32e8b4 4 (nil) 0 0x32e824
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_SET_QUEUE_SIZE 0x32e874 8 (nil) 0 0x32e814
0009:fixme:comm:set_queue_size insize 4096 outsize 2048 unimplemented stub
0009:trace:comm:SetCommTimeouts (0x12c, 0x1033990)
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_SET_TIMEOUTS 0x32e858 20 (nil) 0 0x32e7f4
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_SET_DTR (nil) 0 (nil) 0 0x32e7b4
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_CLR_RTS (nil) 0 (nil) 0 0x32e7b4
0009:trace:comm:io_control 0x12c IOCTL_SERIAL_GET_COMMSTATUS (nil) 0 0x32e9b8 20 0x32e954
0009:trace:comm:ClearCommError => status 0,0, in 0, out 0, eof 0, wait 0


So, is this just not supported (unimplemented) or is there anything I can do to make this work?

Thank you!


Top 
Display posts from previous:  Sort by  
 
 Page 1 of 1 [ 1 post ] 




Board index » WineHQ » Wine Help » Linux


Who is online

Users browsing this forum: No registered users and 10 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: