SKSE (Skyrim Script Ext.) not working on Wine-staging 4.8

Questions about Wine on Linux
Post Reply
feadanaigh
Newbie
Newbie
Posts: 3
Joined: Tue May 14, 2019 3:28 am

SKSE (Skyrim Script Ext.) not working on Wine-staging 4.8

Post by feadanaigh » Tue May 14, 2019 3:48 am

After Update to Wine-Staging 4.8, the Skyrim Script Extender SKSE 1.7.3 stopped working. 4.7 and before were running fine.
(Note: it's about the SKSE, the game itself runs fine.)

Thanks in advance for any help.

Error message:
SHGetFolderPath 00000005 failed (result = 80070002 lasterr = 00000057)
Assertion failed in .\IDebugLog.cpp (64): SUCCEEDED(err) (code = FFFFFFFF80070002 (-2147024894))

System Info:
Linux Mint 18.3 (Xenial) 64-Bit
Kernel: 4.15.0-48 Generic
Wine-Staging 4.8
Skyrim Legendary Edition (32-Bit)

Backtrace:

Code: Select all

Unhandled exception: page fault on write access to 0x00000000 in 32-bit code (0x00405183).
Register dump:
 CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
 EIP:00405183 ESP:0032fb6c EBP:0032fb6c EFLAGS:00010206(  R- --  I   - -P- )
 EAX:00000061 EBX:7ffdf000 ECX:00407c86 EDX:00000000
 ESI:00431bd0 EDI:00000000
Stack dump:
0x0032fb6c:  0032fb80 00405204 00000000 ffffffff
0x0032fb7c:  0032fb90 0032fcac 00404c6c 0041929c
0x0032fb8c:  00000040 0041928c 80070002 ffffffff
0x0032fb9c:  bfbebd00 c3c2c1c0 c7c6c5c4 cbcac9c8
0x0032fbac:  cfcecdcc d3d2d1d0 d7d6d5d4 dbdad9d8
0x0032fbbc:  dfdedddc c3c2c1c0 c7c6c5c4 cbcac9c8
Backtrace:
=>0 0x00405183 EntryPoint+0xffffffff() in skse_loader (0x0032fb6c)
  1 0x00405204 EntryPoint+0xffffffff() in skse_loader (0x0032fb80)
  2 0x00404c6c EntryPoint+0xffffffff() in skse_loader (0x0032fcac)
  3 0x0040143f EntryPoint+0xffffffff() in skse_loader (0x0032fe78)
  4 0x004074b1 EntryPoint+0xffffffff() in skse_loader (0x0032fec0)
  5 0x7b4828f9 call_process_entry+0x18() in kernel32 (0x0032fee8)
  6 0x7b48500f ExitProcess+0x2702() in kernel32 (0x0032ffd8)
  7 0x7b48290a call_process_entry+0x29() in kernel32 (0x0032ffec)
0x00405183 EntryPoint+0xffffffff in skse_loader: movl	$0xdeadbeef,0x00000000

Valeria
Newbie
Newbie
Posts: 2
Joined: Wed May 22, 2019 8:44 am

Re: SKSE (Skyrim Script Ext.) not working on Wine-staging 4.

Post by Valeria » Wed May 22, 2019 8:50 am

Skyrim Special Edition with SKSE64 also won't work while the game itself runs fine when not using SKSE64, used to work under earlier Wine-staging versions.

AmandaC
Newbie
Newbie
Posts: 2
Joined: Wed May 22, 2019 1:06 pm

Re: SKSE (Skyrim Script Ext.) not working on Wine-staging 4.

Post by AmandaC » Wed May 22, 2019 1:08 pm

feadanaigh wrote:After Update to Wine-Staging 4.8, the Skyrim Script Extender SKSE 1.7.3 stopped working. 4.7 and before were running fine.
(Note: it's about the SKSE, the game itself runs fine.)

Thanks in advance for any help.

Error message:
SHGetFolderPath 00000005 failed (result = 80070002 lasterr = 00000057)
Assertion failed in .\IDebugLog.cpp (64): SUCCEEDED(err) (code = FFFFFFFF80070002 (-2147024894))

System Info:
Linux Mint 18.3 (Xenial) 64-Bit
Kernel: 4.15.0-48 Generic
Wine-Staging 4.8
Skyrim Legendary Edition (32-Bit)

Backtrace:

Code: Select all

Unhandled exception: page fault on write access to 0x00000000 in 32-bit code (0x00405183).
Register dump:
 CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
 EIP:00405183 ESP:0032fb6c EBP:0032fb6c EFLAGS:00010206(  R- --  I   - -P- )
 EAX:00000061 EBX:7ffdf000 ECX:00407c86 EDX:00000000
 ESI:00431bd0 EDI:00000000
Stack dump:
0x0032fb6c:  0032fb80 00405204 00000000 ffffffff
0x0032fb7c:  0032fb90 0032fcac 00404c6c 0041929c
0x0032fb8c:  00000040 0041928c 80070002 ffffffff
0x0032fb9c:  bfbebd00 c3c2c1c0 c7c6c5c4 cbcac9c8
0x0032fbac:  cfcecdcc d3d2d1d0 d7d6d5d4 dbdad9d8
0x0032fbbc:  dfdedddc c3c2c1c0 c7c6c5c4 cbcac9c8
Backtrace:
=>0 0x00405183 EntryPoint+0xffffffff() in skse_loader (0x0032fb6c)
  1 0x00405204 EntryPoint+0xffffffff() in skse_loader (0x0032fb80)
  2 0x00404c6c EntryPoint+0xffffffff() in skse_loader (0x0032fcac)
  3 0x0040143f EntryPoint+0xffffffff() in skse_loader (0x0032fe78)
  4 0x004074b1 EntryPoint+0xffffffff() in skse_loader (0x0032fec0)
  5 0x7b4828f9 call_process_entry+0x18() in kernel32 (0x0032fee8)
  6 0x7b48500f ExitProcess+0x2702() in kernel32 (0x0032ffd8)
  7 0x7b48290a call_process_entry+0x29() in kernel32 (0x0032ffec)
0x00405183 EntryPoint+0xffffffff in skse_loader: movl	$0xdeadbeef,0x00000000
Facing the same issue here. Help is highly appreciated.

Thanks in advance,
Regards,
Amanda

Valeria
Newbie
Newbie
Posts: 2
Joined: Wed May 22, 2019 8:44 am

Re: SKSE (Skyrim Script Ext.) not working on Wine-staging 4.

Post by Valeria » Thu May 23, 2019 10:14 am

I downgraded to Wine 4.7, hope it will be fixed in 4.9.

feadanaigh
Newbie
Newbie
Posts: 3
Joined: Tue May 14, 2019 3:28 am

Re: SKSE (Skyrim Script Ext.) not working on Wine-staging 4.

Post by feadanaigh » Sun May 26, 2019 2:31 pm

Same here, used 4.7 so far.
Just updated to 4.9 and it's working again. So the only thing is to find out the changes from 4.7 to 4.8 and 4.9 which prevented it from running.

lahmbi5678
Level 7
Level 7
Posts: 823
Joined: Thu Aug 27, 2009 6:23 am

Re: SKSE (Skyrim Script Ext.) not working on Wine-staging 4.

Post by lahmbi5678 » Sun May 26, 2019 3:28 pm

Did you file a bug report? The issue won't be fixed, if the wine devs don't know about it.

feadanaigh
Newbie
Newbie
Posts: 3
Joined: Tue May 14, 2019 3:28 am

Re: SKSE (Skyrim Script Ext.) not working on Wine-staging 4.

Post by feadanaigh » Mon May 27, 2019 2:32 pm

So you are basically saying that this forum is useless to basic users who aren't coders or geeks who know every single step on the internet. Thanks for the info.

User avatar
dimesio
Moderator
Moderator
Posts: 12675
Joined: Tue Mar 25, 2008 10:30 pm

Re: SKSE (Skyrim Script Ext.) not working on Wine-staging 4.

Post by dimesio » Mon May 27, 2019 3:21 pm

lahmbi5678 wrote:Did you file a bug report? The issue won't be fixed, if the wine devs don't know about it.
If the issue is already fixed in 4.9 there's no need to file a bug report.

lahmbi5678
Level 7
Level 7
Posts: 823
Joined: Thu Aug 27, 2009 6:23 am

Re: SKSE (Skyrim Script Ext.) not working on Wine-staging 4.

Post by lahmbi5678 » Tue May 28, 2019 12:53 am

Yes, sorry. I'm quite sure, that the post mentioning 4.9 working again wasn't there at the time I started writing my post. Otoh I was working on something else at the same time, maybe I overlooked it or should have updated the browser tab. Anyways, no offense intended, filing bug reports is wine's standard way to get in touch with developers.

AmandaC
Newbie
Newbie
Posts: 2
Joined: Wed May 22, 2019 1:06 pm

Re: SKSE (Skyrim Script Ext.) not working on Wine-staging 4.

Post by AmandaC » Sat Jun 01, 2019 2:08 pm

AmandaC wrote:
feadanaigh wrote:After Update to Wine-Staging 4.8, the Skyrim Script Extender SKSE 1.7.3 stopped working. 4.7 and before were running fine.
(Note: it's about the SKSE, the game itself runs fine.)

Thanks in advance for any help.

Error message:
SHGetFolderPath 00000005 gimp freejobalert notepad++ failed (result = 80070002 lasterr = 00000057)
Assertion failed in .\IDebugLog.cpp (64): SUCCEEDED(err) (code = FFFFFFFF80070002 (-2147024894))

System Info:
Linux Mint 18.3 (Xenial) 64-Bit
Kernel: 4.15.0-48 Generic
Wine-Staging 4.8
Skyrim Legendary Edition (32-Bit)

Backtrace:

Code: Select all

Unhandled exception: page fault on write access to 0x00000000 in 32-bit code (0x00405183).
Register dump:
 CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
 EIP:00405183 ESP:0032fb6c EBP:0032fb6c EFLAGS:00010206(  R- --  I   - -P- )
 EAX:00000061 EBX:7ffdf000 ECX:00407c86 EDX:00000000
 ESI:00431bd0 EDI:00000000
Stack dump:
0x0032fb6c:  0032fb80 00405204 00000000 ffffffff
0x0032fb7c:  0032fb90 0032fcac 00404c6c 0041929c
0x0032fb8c:  00000040 0041928c 80070002 ffffffff
0x0032fb9c:  bfbebd00 c3c2c1c0 c7c6c5c4 cbcac9c8
0x0032fbac:  cfcecdcc d3d2d1d0 d7d6d5d4 dbdad9d8
0x0032fbbc:  dfdedddc c3c2c1c0 c7c6c5c4 cbcac9c8
Backtrace:
=>0 0x00405183 EntryPoint+0xffffffff() in skse_loader (0x0032fb6c)
  1 0x00405204 EntryPoint+0xffffffff() in skse_loader (0x0032fb80)
  2 0x00404c6c EntryPoint+0xffffffff() in skse_loader (0x0032fcac)
  3 0x0040143f EntryPoint+0xffffffff() in skse_loader (0x0032fe78)
  4 0x004074b1 EntryPoint+0xffffffff() in skse_loader (0x0032fec0)
  5 0x7b4828f9 call_process_entry+0x18() in kernel32 (0x0032fee8)
  6 0x7b48500f ExitProcess+0x2702() in kernel32 (0x0032ffd8)
  7 0x7b48290a call_process_entry+0x29() in kernel32 (0x0032ffec)
0x00405183 EntryPoint+0xffffffff in skse_loader: movl	$0xdeadbeef,0x00000000
Facing the same issue here. Help is highly appreciated.

Thanks in advance,
Regards,
Amanda
Downgraded to 4.7 too and works like before.

Regards,
Amanda

Post Reply