Noob problems with Darwine

[beerco]

I've installed darwine 1.1.9 on my mac. I've read all of the tutorials and forums that I could find but I'm still not able to solve my problem. I imagine I must be missing something that's so obvious that it doesn't even make its way into a tutorial.

I can't run programs. If I start winehelper and try to run a program (say regedit.exe) I get the errors at the end of this post in the log:

The app was started from the applications folder, not the fake c: drive.

Am I missing some files? Any advice on what I'm doing wrong?

TIA,


err:module:DelayLoadFailureHook failed to delay load setupapi.dll.InstallHinfSectionW
wine: Call from 0x7b833309 to unimplemented function setupapi.dll.InstallHinfSectionW, aborting
wine: Unimplemented function setupapi.dll.InstallHinfSectionW called at address 0x7b833309 (thread 000b), starting debugger...
couldn't load main module (2)
Unhandled exception: unimplemented function setupapi.dll.InstallHinfSectionW called in 32-bit code (0x7b8333ab).
Register dump:
CS:0017 SS:001f DS:001f ES:001f FS:1007 GS:0037
EIP:7b8333ab ESP:0033fc74 EBP:0033fcf8 EFLAGS:00000202( - 00 - - I1)
EAX:7b8195c1 EBX:7b833322 ECX:00000000 EDX:0033fd48
ESI:0033fd50 EDI:0033fcac
Stack dump:
0x0033fc74: 00000036 00000036 7bcabc08 7bc270f8
0x0033fc84: 601837a4 0033fcb8 0033fd10 80000100
0x0033fc94: 00000001 00000000 7b833309 00000002
0x0033fca4: 601837b8 601837f4 00000056 0033fcd4
0x0033fcb4: 6000e930 0033fd08 6000e986 00000001
0x0033fcc4: 7b93f000 7b8b0618 7b8b0630 0033fd20
0200: sel=1007 base=7ffc0000 limit=0000ffff 32-bit rw-
Backtrace:
=>1 0x7b8333ab (0x0033fcf8)
2 0x7b85ff78 (0x0033fd68)
3 0x6017f091 (0x0033fdb8)
4 0x6017b248 (0x0033fe88)
5 0x6017eed8 (0x0033ff08)
6 0x6017f189 (0x0033ff38)
7 0x7b87165d (0x0033ffe8)
0x7b8333ab: subl $4,%esp
Modules:
Module Address Debug info Name (0 modules)
Threads:
process tid prio (all id:s are in hex)
00000008
00000009 0
0000000a (D) C:\windows\system32\wineboot.exe
0000000b 0 <==
0000000c
0000000e 0
0000000d 0
Backtrace:
=>1 0x7b8333ab (0x0033fcf8)
2 0x7b85ff78 (0x0033fd68)
3 0x6017f091 (0x0033fdb8)
4 0x6017b248 (0x0033fe88)
5 0x6017eed8 (0x0033ff08)
6 0x6017f189 (0x0033ff38)
7 0x7b87165d (0x0033ffe8)
err:module:attach_process_dlls "gdi32.dll" failed to initialize, aborting
err:module:LdrInitializeThunk Main exe initialization for L"Z:\\Applications\\Darwine\\Sample WineLib Applications\\notepad.exe" failed, status c0000005
¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°”¡±°–‰err:module:attach_process_dlls "gdi32.dll" failed to initialize, aborting
err:module:attach_process_dlls "gdi32.dll" failed to initialize, aborting
err:module:DelayLoadFailureHook failed to delay load user32.dll.LoadStringA
wine: Call from 0x7b833309 to unimplemented function user32.dll.LoadStringA, aborting
wine: Unimplemented function user32.dll.LoadStringA called at address 0x7b833309 (thread 0009), starting debugger...
couldn't load main module (0)
Unhandled exception: unimplemented function user32.dll.LoadStringA called in 32-bit code (0x7b8333ab).
Register dump:
CS:0017 SS:001f DS:001f ES:001f FS:1007 GS:0037
EIP:7b8333ab ESP:0032fcd4 EBP:0032fd58 EFLAGS:00000202( - 00 - - I1)
EAX:7b8195c1 EBX:7b833322 ECX:00000000 EDX:0032fda8
ESI:0032fdb0 EDI:0032fd0c
Stack dump:
0x0032fcd4: 0000002c 0000002c 7bcabc08 7bc270f8
0x0032fce4: 6018dc88 0032fd18 0032fd70 80000100
0x0032fcf4: 00000001 00000000 7b833309 00000002
0x0032fd04: 6018dcc2 6018ehex)
00000008 (D) Z:\Applications\Darwine\Sample WineLib Applications\regedit.exe
00000009 0 <==
0000000c
0000000e 0
0000000d 0
Backtrace:
=>1 0x7b8333ab (0x0032fd58)
2 0x7b85ff78 (0x0032fdc8)
3 0x6018b464 (0x0032fe18)
4 0x6017b368 (0x0032fe88)
5 0x6018b680 (0x0032ff08)
6 0x6018b55c (0x0032ff38)
7 0x7b87165d (0x0032ffe8)
berr:module:DelayLoadFailureHook failed to delay load user32.dll.LoadStringA
wine: Call from 0x7b833309 to unimplemented function user32.dll.LoadStringA, aborting
wine: Unimplemented function user32.dll.LoadStringA called at address 0x7b833309 (thread 0009), starting debugger...
couldn't load main module (0)
Unhandled exception: unimplemented function user32.dll.LoadStringA called in 32-bit code (0x7b8333ab).
Register dump:
CS:0017 SS:001f DS:001f ES:001f FS:1007 GS:0037
EIP:7b8333ab ESP:0032fcd4 EBP:0032fd58 EFLAGS:00000202( - 00 - - I1)
EAX:7b8195c1 EBX:7b833322 ECX:00000000 EDX:0032fda8
ESI:0032fdb0 EDI:0032fd0c
Stack dump:
0x0032fcd4: 0000002c 0000002c 7bcabc08 7bc270f8
0x0032fce4: 6018dc88 0032fd18 0032fd70 80000100
0x0032fcf4: 00000001 00000000 7b833309 00000002
0x0032fd04: 6018dcc2 6018ehex)
00000008 (D) Z:\Applications\Darwine\Sample WineLib Applications\regedit.exe
00000009 0 <==
0000000c
0000000e 0
0000000d 0
Backtrace:
=>1 0x7b8333ab (0x0032fd58)
2 0x7b85ff78 (0x0032fdc8)
3 0x6018b464 (0x0032fe18)
4 0x6017b368 (0x0032fe88)
5 0x6018b680 (0x0032ff08)
6 0x6018b55c (0x0032ff38)
7 0x7b87165d (0x0032ffe8)
condaryClick_com.apple.mouse.scaling_NSNavRecentPlaces_(NSNavPanelFileLastListModeForSaveModeKey_AppleAntiAliasingThreshold_com.apple.springing.enabled_com.apple.scrollwheel.scaling_AppleEnableMenuBarTransparency_"NSNavPanelFileListModeForSaveMode2_AppleCollationOrder_NSNavPanelSidebarKeyForOpen_AppleScrollAnimationEnabled_AppleShowAllExtensions_com.apple.springing.delay[AppleLocale_"NSNavPanelFileListModeForOpenMode2^NSNavSortOrder

[James Mckenzie]

beerco <[email protected]> wrote on March 9th:

I've installed darwine 1.1.9 on my mac. I've read all of the tutorials
and forums that I could find but I'm still not able to solve my problem.
I imagine I must be missing something that's so obvious that it doesn't
even make its way into a tutorial.

No, this is problem that appeared with a newer build of Wine for MacOSX
that Mike Kronenberg produces. We have not been able to figure out
what caused it. It may be something that Apple did during the upgrade
process for Leopard, it may be because of external libraries, or it just
may be a build that runs for some, but not for others.

I can't run programs. If I start winehelper and try to run a program
(say regedit.exe) I get the errors at the end of this post in the log:

Can you try this:

Open a terminal session.
Change directories to /Applications/Darwine/Sample\ Library\ Applications
wine regedit

and see if this runs and if you get any strange error messages after Wine
crashes?

The app was started from the applications folder, not the fake c: drive.

Am I missing some files? Any advice on what I'm doing wrong?

[Error messages removed]

Questions based upon what I wrote above [please use the quote feature and
reply to each with an answer below the question:

What version of MacOSX are you using?

Do you have either the Fink or MacPorts products installed?

Have you installed XQuartz (if you don't know what it is, you have not)?

Also, I am working with the folks at good-day.net to get a newer version of
Wine for MacOSX uploaded. Please be patient.

James McKenzie

[beerco]

Can you try this:

Open a terminal session.
Change directories to /Applications/Darwine/Sample\ Library\ Applications
wine regedit

and see if this runs and if you get any strange error messages after Wine
crashes?

Interesting, I went into that folder , typed "wine regedit" and got wine: command not found

Questions based upon what I wrote above [please use the quote feature and
reply to each with an answer below the question:

What version of MacOSX are you using?

Mac OSX v10.5.6

Do you have either the Fink or MacPorts products installed?

No to both

Have you installed XQuartz (if you don't know what it is, you have not)?

Nope

Also, I am working with the folks at good-day.net to get a newer version of
Wine for MacOSX uploaded. Please be patient.

James McKenzie

Thanks for your help!

[covox]

As someone who got burned by Zach Drayer's build (which subsequently breaks Mike Kronenberg's build, despite it working perfectly before), I think I've found the cause of the issue. Drayer's build dumps a lot of FreeType crap into the hidden /usr/local folder. Nuking everything in there (the only other thing I had was MacFUSE, easily replaceable) did the trick, and Mike's build works once again.

[James Mckenzie]

covox <[email protected]> wrote on March 24th:

As someone who got burned by Zach Drayer's build (which subsequently breaks Mike Kronenberg's build, despite it working perfectly before), I think I've found the cause of the issue. Drayer's build dumps a lot of FreeType crap into the hidden /usr/local folder. Nuking everything in there (the only other thing I had was MacFUSE, easily replaceable) did the trick, and Mike's build works once again.

I'll check on this. I know that Mike's builds do not drop files anywhere else other than in the Darwine application 'folder'. It is unusual that Mike's build would be looking in the /usr/local directory structure for any files as well.

James McKenzie

[tjae]

As someone who got burned by Zach Drayer's build (which subsequently breaks Mike Kronenberg's build, despite it working perfectly before), I think I've found the cause of the issue. Drayer's build dumps a lot of FreeType crap into the hidden /usr/local folder. Nuking everything in there (the only other thing I had was MacFUSE, easily replaceable) did the trick, and Mike's build works once again.

I agree with that. I also deleted all the Freetype and Fontforge files and now the Darwine works

[Stg]

Today I tried to build last development version of wine from scratch, it was
built successfully, but running ./winecfg produces same error
--
View this message in context: http://www.nabble.com/Noob-problems-wit ... 04316.html
Sent from the Wine - Users mailing list archive at Nabble.com.

[beerco]

As someone who got burned by Zach Drayer's build (which subsequently breaks Mike Kronenberg's build, despite it working perfectly before), I think I've found the cause of the issue. Drayer's build dumps a lot of FreeType crap into the hidden /usr/local folder. Nuking everything in there (the only other thing I had was MacFUSE, easily replaceable) did the trick, and Mike's build works once again.

Couple questions -

I found a usr/local folder but can't find any Freetype stuff. Could you post step by step instructions on how to nuke this (I wouldn't own a mac if I were fluent in unix)

Is there any way to be able to see all files including hidden files using the apple finder?

[James Mckenzie]

beerco <[email protected]> wrote on March 29th:

covox wrote:

As someone who got burned by Zach Drayer's build (which subsequently breaks Mike Kronenberg's build, despite it working perfectly before), I think I've found the cause of the issue. Drayer's build dumps a lot of FreeType crap into the hidden /usr/local folder. Nuking everything in there (the only other thing I had was MacFUSE, easily replaceable) did the trick, and Mike's build works once again.

Couple questions -

I found a usr/local folder but can't find any Freetype stuff. Could you post step by step instructions on how to nuke this (I wouldn't own a mac if I were fluent in unix)

You should not have to remove anything except entries related to the Zach's code in /usr/local/lib. Look for files that begin with libfontforge, libfreetype, libdraw, libgioftp, libgunicode, and lastly libgutils. The way that MacOSX first looks for files is to look in /usr/lib and then /usr/local/lib.

Is there any way to be able to see all files including hidden files using the apple finder?

There is. Google for programs that support this. HOWEVER, these files are deliberately hidden because if you delete them, you are in for a system rebuild. I've seen folks that have deleted files that were needed and did not have a backup of them (Time Machine will NOT do this for you.) My suggestion is if you don't know what the file does, do not delete it. Ask first in a Mac support forum.

James McKenzie

[James McKenzie]

beerco wrote:

covox wrote:

As someone who got burned by Zach Drayer's build (which subsequently breaks Mike Kronenberg's build, despite it working perfectly before), I think I've found the cause of the issue. Drayer's build dumps a lot of FreeType crap into the hidden /usr/local folder. Nuking everything in there (the only other thing I had was MacFUSE, easily replaceable) did the trick, and Mike's build works once again.

Couple questions -

I found a usr/local folder but can't find any Freetype stuff. Could you post step by step instructions on how to nuke this (I wouldn't own a mac if I were fluent in unix)

Is there any way to be able to see all files including hidden files using the apple finder?

No feedback means that the information in my previous mail listing worked?

James McKenzie